|
Z50-05-070XXX - 50Ω Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, variable length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
Z50-05-070XXX,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit
Z50-05-070XXX - 50Ω Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, variable length - Low
return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic
substrate manufactured by US Microwaves Z50-05-070XXX,50 ohm impedance microstrip transmission lines,50 ohm microstrip
transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit USMZ50-05-070500 - Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70
mils width, 500 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines
on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50-05-070500,50 ohm impedance microstrip
transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm
microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50-05-070250 - Z50 50Ohms
Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 250 mils length - Low return loss optimised up to
50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US
Microwaves USMZ50-05-070250,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission
lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit USMZ50-05-070200 - Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70
mils width, 200 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines
on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50-05-070200,50 ohm impedance microstrip
transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm
microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50-05-070150 - Z50 50Ohms
Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 150 mils length - Low return loss optimised up to
50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US
Microwaves USMZ50-05-070150,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission
lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit USMZ50-05-070100 - Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70
mils width, 100 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines
on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50-05-070100,50 ohm impedance microstrip
transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm
microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50-05-070050 - Z50 50Ohms
Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 50 mils length - Low return loss optimised up to
50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US
Microwaves USMZ50-05-070050,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission
lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit US MICROWAVES Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 50 mils length Advanced Microwave Components USMZ50-05-070050 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION
LINE Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic,
70 mils width, 50 mils length USMZ50-05-070050-WP USMZ50-05-070050 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT
DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated
circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of
width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting
metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second
dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the
printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component
mounting is relatively easy. USMZ50-05-070050 50 ohm microstrip transmission lines are basic building blocks designed
to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different
alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the designer
complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50-05-070050 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 4.7 mils Width 70 mils Length 50 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50-05-070050 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 5 50x70±2 Standard 3µm
thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible
with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50
50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 50 mils length USMZ50-05-070050-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50-05-070050 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 50 mils length
USMZ50-05-070050-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP
TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE
LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 70 50
USMZ50-05-070050-WP -WP 127 $3.96 USMZ50-05-070050 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military
or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be
established on a case by case basis. For any special applications, die level KGD qualification requirements, different
packaging or custom configurations, contact sales department. USMZ50-05-070050-WP 50Ω MICROSTRIP TRANSMISSION LINES
INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line
HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line.
On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before,
becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products
packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks
ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip
transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs
(WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high
volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked
and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for
customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY!
US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products
provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate
as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights
of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its
product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within
support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space
equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home
Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No
material from this site may be used or reproduced without permission. US MICROWAVES Z50 50Ohms Microstrip transmission
lines, 5 mils thick ceramic, 70 mils width, 100 mils length Advanced Microwave Components USMZ50-05-070100 FEATURES
APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different
ceramic thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most
microwave applications use 50 ohm microstrip transmission lines as basic building block. Z50 50Ohms Microstrip
transmission lines, 5 mils thick ceramic, 70 mils width, 100 mils length USMZ50-05-070100-WP USMZ50-05-070100 50Ω
MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are
widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is
composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric
substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative
permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the
microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because
the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50-05-070100 50 ohm
microstrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits.
50 ohms microstrip transmission lines are available in different alumina ceramic thicknesses and different widths and
lengths. 50 ohm microstrip transmission lines offer the designer complete flexibility and repeatability for the most
challenging RF and microwave applications. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin
film microwave products are manufactured using advanced semiconductors and thin film technologies including
ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS
capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution
for all applications that require low noise, long term stability and excellent performance at very high frequencies. US
Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet
resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high
reliability hybrid and multi chip module applications. USMZ50-05-070100 50Ω MICROSTRIP TRANSMISSION LINES
ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 4.7 mils Width 70
mils Length 100 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and
procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the
device. USMZ50-05-070100 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW
[mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 5 100x70±2 Standard 3µm thick, 99.99% electroplated gold with
a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive
epoxy. Custom metallization is available for special orders. layout for Z50 50Ohms Microstrip transmission lines, 5
mils thick ceramic, 70 mils width, 100 mils length USMZ50-05-070100-WP All US Microwaves 50Ω microstrip transmission
lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs,
delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices
for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50-05-070100 50Ω
MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50 50Ohms Microstrip transmission
lines, 5 mils thick ceramic, 70 mils width, 100 mils length USMZ50-05-070100-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN
PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω
MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES
PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 70 100 USMZ50-05-070100-WP -WP 79 $7.20 USMZ50-05-070100 50Ω
MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or
level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any
special applications, die level KGD qualification requirements, different packaging or custom configurations, contact
sales department. USMZ50-05-070100-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail
ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order
confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted
and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO.
For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from
stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire
applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can
be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip
transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders
pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous
supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities
are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no
responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which
may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without
prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are
intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or
nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support
PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site
may be used or reproduced without permission. US MICROWAVES Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 150 mils length Advanced Microwave Components USMZ50-05-070150 FEATURES APPLICATIONS 50Ω
MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different ceramic
thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave
applications use 50 ohm microstrip transmission lines as basic building block. Z50 50Ohms Microstrip transmission
lines, 5 mils thick ceramic, 70 mils width, 150 mils length USMZ50-05-070150-WP USMZ50-05-070150 50Ω MICROSTRIP
TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in
the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin
conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in
turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the
conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that
it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the
top side, component mounting is relatively easy. USMZ50-05-070150 50 ohm microstrip transmission lines are basic
building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines
are available in different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission
lines offer the designer complete flexibility and repeatability for the most challenging RF and microwave applications.
TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using
advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride
resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance
and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term
stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies
for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US
Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module
applications. USMZ50-05-070150 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE
UNITS Impedance 50 Ω Transmission Line width W0 4.7 mils Width 70 mils Length 150 mils Thickness 5 mils Operating
Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond
listed absolute maximum ratings may cause permanent damage to the device. USMZ50-05-070150 50Ω MICROSTRIP TRANSMISSION
LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal Al2O3 Aluminum
Oxide 5 150x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized
with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for
special orders. layout for Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 150 mils
length USMZ50-05-070150-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form.
Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be
available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). USMZ50-05-070150 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS
S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
150 mils length USMZ50-05-070150-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω
MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD
PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY
U/P [$] 5 70 150 USMZ50-05-070150-WP -WP 57 $8.92 USMZ50-05-070150 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for
space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum
order levels to be established on a case by case basis. For any special applications, die level KGD qualification
requirements, different packaging or custom configurations, contact sales department. USMZ50-05-070150-WP 50Ω
MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission
lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for
all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales
department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip
transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom
designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For
smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be
supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip
transmission lines are available only for customers that have issued firm orders pending qualification of product in a
particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω
Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made
every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves
for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves
reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are
not authorized for and should not be used within support systems which are intended for surgical implants into the
body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the
specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order
Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 200
mils length Advanced Microwave Components USMZ50-05-070200 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low
insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes. Engineering
Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm microstrip
transmission lines as basic building block. Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 200 mils length USMZ50-05-070200-WP USMZ50-05-070200 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND
SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from
hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo,
thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal
ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second
dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the
printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component
mounting is relatively easy. USMZ50-05-070200 50 ohm microstrip transmission lines are basic building blocks designed
to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different
alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the designer
complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50-05-070200 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 4.7 mils Width 70 mils Length 200 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50-05-070200 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 5 200x70±2 Standard 3µm
thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible
with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50
50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 200 mils length USMZ50-05-070200-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50-05-070200 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 200 mils length
USMZ50-05-070200-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP
TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE
LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 70
200 USMZ50-05-070200-WP -WP 45 $11.36 USMZ50-05-070200 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space,
military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order
levels to be established on a case by case basis. For any special applications, die level KGD qualification
requirements, different packaging or custom configurations, contact sales department. USMZ50-05-070200-WP 50Ω
MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission
lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for
all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales
department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip
transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom
designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For
smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be
supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip
transmission lines are available only for customers that have issued firm orders pending qualification of product in a
particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω
Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made
every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves
for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves
reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are
not authorized for and should not be used within support systems which are intended for surgical implants into the
body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the
specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order
Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 250
mils length Advanced Microwave Components USMZ50-05-070250 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low
insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes. Engineering
Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm microstrip
transmission lines as basic building block. Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 250 mils length USMZ50-05-070250-WP USMZ50-05-070250 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND
SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from
hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo,
thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal
ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second
dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the
printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component
mounting is relatively easy. USMZ50-05-070250 50 ohm microstrip transmission lines are basic building blocks designed
to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different
alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the designer
complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50-05-070250 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 4.7 mils Width 70 mils Length 250 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50-05-070250 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 5 250x70±2 Standard 3µm
thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible
with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50
50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 250 mils length USMZ50-05-070250-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50-05-070250 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 250 mils length
USMZ50-05-070250-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP
TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE
LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 70
250 USMZ50-05-070250-WP -WP 37 $13.88 USMZ50-05-070250 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space,
military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order
levels to be established on a case by case basis. For any special applications, die level KGD qualification
requirements, different packaging or custom configurations, contact sales department. USMZ50-05-070250-WP 50Ω
MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission
lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for
all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales
department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip
transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom
designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For
smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be
supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip
transmission lines are available only for customers that have issued firm orders pending qualification of product in a
particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω
Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made
every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves
for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves
reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are
not authorized for and should not be used within support systems which are intended for surgical implants into the
body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the
specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order
Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 500
mils length Advanced Microwave Components USMZ50-05-070500 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low
insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes. Engineering
Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm microstrip
transmission lines as basic building block. Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 500 mils length USMZ50-05-070500-WP USMZ50-05-070500 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND
SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from
hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo,
thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal
ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second
dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the
printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component
mounting is relatively easy. USMZ50-05-070500 50 ohm microstrip transmission lines are basic building blocks designed
to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different
alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the designer
complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50-05-070500 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 4.7 mils Width 70 mils Length 500 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50-05-070500 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 5 500x70±2 Standard 3µm
thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible
with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50
50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 500 mils length USMZ50-05-070500-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50-05-070500 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 500 mils length
USMZ50-05-070500-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP
TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE
LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 70
500 USMZ50-05-070500-WP -WP 19 $27.76 USMZ50-05-070500 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space,
military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order
levels to be established on a case by case basis. For any special applications, die level KGD qualification
requirements, different packaging or custom configurations, contact sales department. USMZ50-05-070500-WP 50Ω
MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission
lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for
all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales
department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip
transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom
designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For
smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be
supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip
transmission lines are available only for customers that have issued firm orders pending qualification of product in a
particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω
Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made
every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves
for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves
reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are
not authorized for and should not be used within support systems which are intended for surgical implants into the
body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the
specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order
Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES 50Ω Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, variable
length Advanced Microwave Components USM Z50-05-070XXX FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low
insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes. Engineering
Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm microstrip
transmission lines as basic building block. 50Ω Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
variable length Z50-05-070XXX Z50-05-070XXX 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION
NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to
monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and
length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The
substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material,
air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB)
fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy.
USM Z50-05-070XXX 50 ohm microstrip transmission lines are basic building blocks designed to be used in chip and wire
microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different alumina ceramic thicknesses
and different widths and lengths. 50 ohm microstrip transmission lines offer the designer complete flexibility and
repeatability for the most challenging RF and microwave applications. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM
MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film
technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization
and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the
preferred solution for all applications that require low noise, long term stability and excellent performance at very
high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive
films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and
are ideal for high reliability hybrid and multi chip module applications. Z50-05-070XXX 50Ω MICROSTRIP TRANSMISSION
LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 4.7 mils
Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. Z50-05-070XXX 50Ω MICROSTRIP
TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Top Conductor Backside metal Al2O3
Aluminum Oxide 5±0.5 LLx70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is
metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
50 mils length USMZ50-05-070050-WP layout for Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 100 mils length USMZ50-05-070100-WP layout for Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic,
70 mils width, 150 mils length USMZ50-05-070150-WP layout for Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 200 mils length USMZ50-05-070200-WP layout for Z50 50Ohms Microstrip transmission lines, 5 mils
thick ceramic, 70 mils width, 250 mils length USMZ50-05-070250-WP layout for Z50 50Ohms Microstrip transmission lines,
5 mils thick ceramic, 70 mils width, 500 mils length USMZ50-05-070500-WP All US Microwaves 50Ω microstrip transmission
lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs,
delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices
for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). Z50-05-070XXX 50Ω
MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH 50Ω Microstrip transmission lines, 5
mils thick ceramic, 70 mils width, variable length Z50-05-070XXX CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO
VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION T=THICKNESS [mils]
W=WIDTH [mils] L=LENGTH [mils] MO QTY Find part # 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST WIDTH
[mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 70 50 USMZ50-05-070050-WP -WP 127
$3.96 70 100 USMZ50-05-070100-WP -WP 79 $7.20 70 150 USMZ50-05-070150-WP -WP 57 $8.92 70 200 USMZ50-05-070200-WP -WP 45
$11.36 70 250 USMZ50-05-070250-WP -WP 37 $13.88 70 500 USMZ50-05-070500-WP -WP 19 $27.76 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department. Z50-05-070XXX
50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission
lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for
all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales
department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip
transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom
designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested,
visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For
smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be
supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip
transmission lines are available only for customers that have issued firm orders pending qualification of product in a
particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω
Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made
every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves
for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves
reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are
not authorized for and should not be used within support systems which are intended for surgical implants into the
body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the
specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order
Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission.
|
