USMRCT1215G15 Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor 795GHz Center Tapped Thin Film Chip Resistor 15 mils Glass SiXXX 12 x 15 mils for microwave applications manufactured by US Microwaves USMRCT1215G15 Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor 795GHz Center Tapped Thin Film Chip Resistor 15 mils Glass SiXXX 12 x 15 mils for microwave applications manufactured by US Microwaves US MICROWAVES Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor Advanced Microwave Components USMRCT1215G15 FEATURES APPLICATIONS 795GHz Center Tapped Thin Film Chip Resistor Wide resistance range: 0.5Ω to 40kΩ, 1% resistor tolerance available Good TCR tracking Low capacitance value Low insertion loss Available in die form and shipped in waffle packs or film frame, or packed in 2 or 6 pin SOT style packages High power dissipation while working up to GHz range frequencies High reliability and ruggedness Small chip size with reduced stray capacitance per unit area Low temperature coefficient and wide operating temperature range Larger single size for extended value range Biasing discrete transistors circuits Feedback resistors for amplifiers Precision voltage dividers Resistive microwave dividers Wilkinson power dividers Attenuators Microwave amplifiers Transimpedance amplifiers Optical communication receivers Chip and wire hybrid circuits Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE USMRCT1215G15 15x12 mils, 15 mils thickness Glass (SiXXX) thin film center tapped or center tap chip resistors series is designed to be used in microwave hybrid circuits for biasing of active components and as feedback resistors for high speed transimpedance amplifiers for optical communication receivers. Center tap or center tapped thin film chip resistors series are designed to be used for both surface mount applications as well as chip and wire thin film or thick film hybrid circuits from DC to microwave frequencies, and offers the designer flexibility in use as either a single value resistor as two resistors with a center tap feature. The six bonding pads allows the user increased layout flexibility. Center tap or center tapped thin film resistor chips are manufactured on various substrate and designed to satisfy the requirements of prototype development and circuit trimming in hybrid packages through selective wire-bonding. The center tapped resistors, can be used to build Wheatstone Bridge circuits for low noise instrumentation amplifiers, temperature measurements, sensors circuits, etc. For precision measurements of low value resistors, the Kelvin connection should be used. These devices are specifically designed and manufactured to be compatible with gold wire bonding. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Devices are 100% tested, visual inspected and packaged in waffle packs or film frame. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1Ω/sq to 10,000Ω/sq. Resistors from 0.1Ω to x MΩ range are available. The resistive material is high stability Tantalum Nitride or Nickel Chrome with low temperature coefficient of resistance, <75ppm/°C typical. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. All US Microwaves products are manufactured using GOLD CHIP TECHNOLOGY™ a trade mark of Semiconix Corporation. ELECTRICAL CHARACTERISTICS @25°C PARAMETER VALUE UNITS Resistance range (R1=R2) 0.5 to 40000 Ω Capacitance (maximum) per resistor 0.004 pF Power dissipation 0.31 mW/°C 3dB frequency (R1=R2=50Ω) 795.78 GHz Temperature Coefficient -55°C to 150°C 75 ppm/°C Operating Temperature range -55 to +150 °C Maximum working voltage (R1=R2=50Ω) 0.12 V Peak voltage at 25°C, 5 sec 0.17 V Insulation Resistance @25°C 1e+12 Ω RC constant (per resistor, R1=R2=50Ω) 0.2 ps Note: Power dissipation is provided for a temperature difference of 1°C between substrate and thermal (solder) joint. 795GHz Center Tapped Thin Film Chip Resistor - GENERAL DIE INFORMATION SUBSTRATE THICKNESS [mils] DIE SIZE LxW [mils] Glass (SiXXX) 15±0.5 15x12±2 (0.38x0.30±0.05 mm) RESISTOR BONDING PADS BACKSIDE METAL The resistive material is high stability Tantalum Nitride or Nickel Chrome with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10Ω/sq and Rsq>500Ω/sq, the resistive material is proprietary. The bonding pads of the resistors are minimum 4x4 mils, 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is NOT metallized. Standard TiW/Au or other custom metallizations are available upon special request. All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). 795GHz Center Tapped Thin Film Chip Resistor - DIE LAYOUT & MECHANICAL SPECIFICATIONS Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 Note: Image shows area occupied by resistor. Layout for resistor might differ for 1% tolerance due to laser trim requirements. 795GHz Center Tapped Thin Film Chip Resistor S PARAMETERS Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 RETURN LOSS S-PARAMETERS 795GHz Center Tapped Thin Film Chip Resistor CHIP MOUNT Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 795GHz Center Tapped Thin Film Chip Resistor mount 795GHz Center Tapped Thin Film Chip Resistor ASSEMBLY PROCESS - SHORT APPLICATION NOTE 795GHz Center Tapped Thin Film Chip Resistor are designed for critical designs where space is at premium. The Alumina, Aluminum Nitride, Berillium Oxide, Fused Silica or Silicon Microwave Thin Film Chip Resistor can ALL be die attached with conductive epoxy. AuSn or AuGe performs can be used to die attach devices with standard backside metallization of TiW/Au. Sn or SnPb can be used to die attach devices with standard backside metallization of Ti/Ni/Au. Ti/Pt/Au and Ti/Pd/Au are custom backside metallizations that have the advantage of being compatible with All methods of die attaching. 795GHz Center Tapped Thin Film Chip Resistor have metallized gold pads as terminals and they have to be attached using gold wire after the backside is soldered in place. STANDARD PRODUCTS ORDERING INFORMATION USM P/N R [Ω] PACKAGE MIN. QTY U/P [$] ORDER STOCK QTY U/P [$] ORDER USMRCT1215G15-500-1%-WP 50 WAFFLE PACKS 10 RFQ USMRCT1215G15-500-1%-FF 50 FILM FRAME 500 RFQ EIA-24 PART NUMBER BUILDER TOLERANCE [%] R [Ω] Multiplier PACKAGE P/N FINDER INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: DELIVERY: SHIPPING/PACKAGING: SAMPLES: GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

 
 
US MICROWAVES   Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor
Advanced Microwave Components   USMRCT1215G15
 
 

FEATURES
APPLICATIONS
795GHz Center Tapped Thin Film Chip Resistor
Wide resistance range: 0.5Ω to 40kΩ, 1% resistor tolerance available
Good TCR tracking
Low capacitance value
Low insertion loss
Available in die form and shipped in waffle packs or film frame, or packed in 2 or 6 pin SOT style packages
High power dissipation while working up to GHz range frequencies
High reliability and ruggedness
Small chip size with reduced stray capacitance per unit area
Low temperature coefficient and wide operating temperature range
Larger single size for extended value range
Biasing discrete transistors circuits
Feedback resistors for amplifiers
Precision voltage dividers
Resistive microwave dividers
Wilkinson power dividers
Attenuators
Microwave amplifiers
Transimpedance amplifiers
Optical communication receivers
Chip and wire hybrid circuits
Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15

PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
USMRCT1215G15 15x12 mils, 15 mils thickness Glass (SiXXX) thin film center tapped or center tap chip resistors series is designed to be used in microwave hybrid circuits for biasing of active components and as feedback resistors for high speed transimpedance amplifiers for optical communication receivers. Center tap or center tapped thin film chip resistors series are designed to be used for both surface mount applications as well as chip and wire thin film or thick film hybrid circuits from DC to microwave frequencies, and offers the designer flexibility in use as either a single value resistor as two resistors with a center tap feature. The six bonding pads allows the user increased layout flexibility.
Center tap or center tapped thin film resistor chips are manufactured on various substrate and designed to satisfy the requirements of prototype development and circuit trimming in hybrid packages through selective wire-bonding. The center tapped resistors, can be used to build Wheatstone Bridge circuits for low noise instrumentation amplifiers, temperature measurements, sensors circuits, etc. For precision measurements of low value resistors, the Kelvin connection should be used.
These devices are specifically designed and manufactured to be compatible with gold wire bonding. These devices can be used over the full military temperature range -55°C to +125°C.
Quality and workmanship is per MIL-S-883. Devices are 100% tested, visual inspected and packaged in waffle packs or film frame. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1Ω/sq to 10,000Ω/sq. Resistors from 0.1Ω to x MΩ range are available. The resistive material is high stability Tantalum Nitride or Nickel Chrome with low temperature coefficient of resistance, <75ppm/°C typical.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.
All US Microwaves products are manufactured using GOLD CHIP TECHNOLOGY™ a trade mark of Semiconix Corporation.

ELECTRICAL CHARACTERISTICS @25°C
PARAMETER VALUE UNITS
Resistance range (R1=R2) 0.5 to 40000 Ω
Capacitance (maximum) per resistor 0.004 pF
Power dissipation 0.31 mW/°C
3dB frequency (R1=R2=50Ω) 795.78 GHz
Temperature Coefficient -55°C to 150°C 75 ppm/°C
Operating Temperature range -55 to +150 °C
Maximum working voltage (R1=R2=50Ω) 0.12 V
Peak voltage at 25°C, 5 sec 0.17 V
Insulation Resistance @25°C 1e+12 Ω
RC constant (per resistor, R1=R2=50Ω) 0.2 ps
Note: Power dissipation is provided for a temperature difference of 1°C between substrate and thermal (solder) joint.

795GHz Center Tapped Thin Film Chip Resistor - GENERAL DIE INFORMATION
SUBSTRATE THICKNESS [mils] DIE SIZE LxW [mils]
Glass (SiXXX) 15±0.5 15x12±2 (0.38x0.30±0.05 mm)
RESISTOR BONDING PADS BACKSIDE METAL
The resistive material is high stability Tantalum Nitride or Nickel Chrome with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10Ω/sq and Rsq>500Ω/sq, the resistive material is proprietary. The bonding pads of the resistors are minimum 4x4 mils, 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is NOT metallized. Standard TiW/Au or other custom metallizations are available upon special request.
All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

795GHz Center Tapped Thin Film Chip Resistor - DIE LAYOUT & MECHANICAL SPECIFICATIONS
Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15
Note: Image shows area occupied by resistor. Layout for resistor might differ for 1% tolerance due to laser trim requirements.
795GHz Center Tapped Thin Film Chip Resistor S PARAMETERS
Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 RETURN LOSS S-PARAMETERS
795GHz Center Tapped Thin Film Chip Resistor CHIP MOUNT
Center Tapped Glass [SiXXX] GHz Thin Film Chip Resistor USMRCT1215G15 795GHz Center Tapped Thin Film Chip Resistor mount
795GHz Center Tapped Thin Film Chip Resistor ASSEMBLY PROCESS - SHORT APPLICATION NOTE
795GHz Center Tapped Thin Film Chip Resistor are designed for critical designs where space is at premium. The Alumina, Aluminum Nitride, Berillium Oxide, Fused Silica or Silicon Microwave Thin Film Chip Resistor can ALL be die attached with conductive epoxy.
AuSn or AuGe performs can be used to die attach devices with standard backside metallization of TiW/Au. Sn or SnPb can be used to die attach devices with standard backside metallization of Ti/Ni/Au. Ti/Pt/Au and Ti/Pd/Au are custom backside metallizations that have the advantage of being compatible with All methods of die attaching.
795GHz Center Tapped Thin Film Chip Resistor have metallized gold pads as terminals and they have to be attached using gold wire after the backside is soldered in place.

STANDARD PRODUCTS ORDERING INFORMATION
USM P/N R [Ω] PACKAGE MIN. QTY U/P [$] ORDER STOCK QTY U/P [$] ORDER
USMRCT1215G15-500-1%-WP 50 WAFFLE PACKS 10 RFQ      
USMRCT1215G15-500-1%-FF 50 FILM FRAME 500 RFQ      

STANDARD PRODUCTS AVAILABLE FROM STOCK - ORDERING INFORMATION
USM P/N R [Ω] WAFFLE PACK MIN. QTY U/P [$] ORDER/RFQ QTY U/P [$] ORDER/RFQ
Note:
1. EIA-24 values are build of 3 digits. first 2 digits designate the value in Ω, the third digit designates the tenth multiplier.
Example 21kΩ = 21000Ω = 21 x 103 = 213 [EIA-24 notation].
Example 250kΩ = 250000Ω = 25 x 104 = 254 [EIA-24 notation].
2. EIA-96 values are build of 4 digits. first 3 digits designate the value in Ω, the fourth digit designates the tenth multiplier.
Example 21kΩ = 21000Ω = 210 x 102 = 2102 [EIA-96 notation].
Example 250kΩ = 250000Ω = 250 x 103 = 2503 [EIA-96 notation].

EIA-24 PART NUMBER BUILDER
TOLERANCE [%] R [Ω] Multiplier PACKAGE
P/N FINDER

STANDARD PRODUCTS EIA24 VALUES 1% TOLERANCE - ORDERING INFORMATION
USM P/NR [Ω]Stock QtyUSM P/NR [Ω]Stock QtyUSM P/NR [Ω]Stock Qty
USMRCT1215G15-0R500.50USMRCT1215G15-22022.00USMRCT1215G15-911910.00
USMRCT1215G15-0R510.51USMRCT1215G15-24024.00USMRCT1215G15-1021000.00
USMRCT1215G15-0R560.56USMRCT1215G15-27027.00USMRCT1215G15-1121100.00
USMRCT1215G15-0R620.62USMRCT1215G15-30030.00USMRCT1215G15-1221200.00
USMRCT1215G15-0R680.68USMRCT1215G15-33033.00USMRCT1215G15-1321300.00
USMRCT1215G15-0R750.75USMRCT1215G15-36036.00USMRCT1215G15-1521500.00
USMRCT1215G15-0R820.82USMRCT1215G15-39039.00USMRCT1215G15-1621600.00
USMRCT1215G15-0R910.91USMRCT1215G15-43043.00USMRCT1215G15-1821800.00
USMRCT1215G15-1R01.00USMRCT1215G15-47047.00USMRCT1215G15-2022000.00
USMRCT1215G15-1R11.10USMRCT1215G15-50050.00USMRCT1215G15-2222200.00
USMRCT1215G15-1R21.20USMRCT1215G15-51051.00USMRCT1215G15-2422400.00
USMRCT1215G15-1R31.30USMRCT1215G15-56056.00USMRCT1215G15-2722700.00
USMRCT1215G15-1R51.50USMRCT1215G15-62062.00USMRCT1215G15-3023000.00
USMRCT1215G15-1R61.60USMRCT1215G15-68068.00USMRCT1215G15-3323300.00
USMRCT1215G15-1R81.80USMRCT1215G15-75075.00USMRCT1215G15-3623600.00
USMRCT1215G15-2R02.00USMRCT1215G15-82082.00USMRCT1215G15-3923900.00
USMRCT1215G15-2R22.20USMRCT1215G15-91091.00USMRCT1215G15-4324300.00
USMRCT1215G15-2R42.40USMRCT1215G15-101100.00USMRCT1215G15-4724700.00
USMRCT1215G15-2R72.70USMRCT1215G15-111110.00USMRCT1215G15-5025000.00
USMRCT1215G15-3R03.00USMRCT1215G15-121120.00USMRCT1215G15-5125100.00
USMRCT1215G15-3R33.30USMRCT1215G15-131130.00USMRCT1215G15-5625600.00
USMRCT1215G15-3R63.60USMRCT1215G15-151150.00USMRCT1215G15-6226200.00
USMRCT1215G15-3R93.90USMRCT1215G15-161160.00USMRCT1215G15-6826800.00
USMRCT1215G15-4R34.30USMRCT1215G15-181180.00USMRCT1215G15-7527500.00
USMRCT1215G15-4R74.70USMRCT1215G15-201200.00USMRCT1215G15-8228200.00
USMRCT1215G15-5R05.00USMRCT1215G15-221220.00USMRCT1215G15-9129100.00
USMRCT1215G15-5R15.10USMRCT1215G15-241240.00USMRCT1215G15-10310000.00
USMRCT1215G15-5R65.60USMRCT1215G15-271270.00USMRCT1215G15-11311000.00
USMRCT1215G15-6R26.20USMRCT1215G15-301300.00USMRCT1215G15-12312000.00
USMRCT1215G15-6R86.80USMRCT1215G15-331330.00USMRCT1215G15-13313000.00
USMRCT1215G15-7R57.50USMRCT1215G15-361360.00USMRCT1215G15-15315000.00
USMRCT1215G15-8R28.20USMRCT1215G15-391390.00USMRCT1215G15-16316000.00
USMRCT1215G15-9R19.10USMRCT1215G15-431430.00USMRCT1215G15-18318000.00
USMRCT1215G15-10010.00USMRCT1215G15-471470.00USMRCT1215G15-20320000.00
USMRCT1215G15-11011.00USMRCT1215G15-501500.00USMRCT1215G15-22322000.00
USMRCT1215G15-12012.00USMRCT1215G15-511510.00USMRCT1215G15-24324000.00
USMRCT1215G15-13013.00USMRCT1215G15-561560.00USMRCT1215G15-27327000.00
USMRCT1215G15-15015.00USMRCT1215G15-621620.00USMRCT1215G15-30330000.00
USMRCT1215G15-16016.00USMRCT1215G15-681680.00USMRCT1215G15-33333000.00
USMRCT1215G15-18018.00USMRCT1215G15-751750.00USMRCT1215G15-36336000.00
USMRCT1215G15-20020.00USMRCT1215G15-821820.00USMRCT1215G15-39339000.00

STANDARD PRODUCTS EIA96 VALUES 1% TOLERANCE - ORDERING INFORMATION
USM P/NR [Ω]Stock QtyUSM P/NR [Ω]Stock QtyUSM P/NR [Ω]Stock Qty
USMRCT1215G15-0R5000.500USMRCT1215G15-22R122.100USMRCT1215G15-9090909.000
USMRCT1215G15-0R5100.510USMRCT1215G15-22R622.600USMRCT1215G15-9100910.000
USMRCT1215G15-0R5110.511USMRCT1215G15-23R223.200USMRCT1215G15-9310931.000
USMRCT1215G15-0R5230.523USMRCT1215G15-23R723.700USMRCT1215G15-9530953.000
USMRCT1215G15-0R5360.536USMRCT1215G15-24R024.000USMRCT1215G15-9760976.000
USMRCT1215G15-0R5490.549USMRCT1215G15-24R324.300USMRCT1215G15-10011000.000
USMRCT1215G15-0R5600.560USMRCT1215G15-24R924.900USMRCT1215G15-10211020.000
USMRCT1215G15-0R5620.562USMRCT1215G15-25R525.500USMRCT1215G15-10511050.000
USMRCT1215G15-0R5760.576USMRCT1215G15-26R126.100USMRCT1215G15-10711070.000
USMRCT1215G15-0R5900.590USMRCT1215G15-26R726.700USMRCT1215G15-11011100.000
USMRCT1215G15-0R6040.604USMRCT1215G15-27R027.000USMRCT1215G15-11311130.000
USMRCT1215G15-0R6190.619USMRCT1215G15-27R427.400USMRCT1215G15-11511150.000
USMRCT1215G15-0R6200.620USMRCT1215G15-28R028.000USMRCT1215G15-11811180.000
USMRCT1215G15-0R6340.634USMRCT1215G15-28R728.700USMRCT1215G15-12011200.000
USMRCT1215G15-0R6490.649USMRCT1215G15-29R429.400USMRCT1215G15-12111210.000
USMRCT1215G15-0R6650.665USMRCT1215G15-30R030.000USMRCT1215G15-12411240.000
USMRCT1215G15-0R6800.680USMRCT1215G15-30R130.100USMRCT1215G15-12711270.000
USMRCT1215G15-0R6810.681USMRCT1215G15-30R930.900USMRCT1215G15-13011300.000
USMRCT1215G15-0R6980.698USMRCT1215G15-31R631.600USMRCT1215G15-13311330.000
USMRCT1215G15-0R7150.715USMRCT1215G15-32R432.400USMRCT1215G15-13711370.000
USMRCT1215G15-0R7320.732USMRCT1215G15-33R233.200USMRCT1215G15-14011400.000
USMRCT1215G15-0R7500.750USMRCT1215G15-34R034.000USMRCT1215G15-14311430.000
USMRCT1215G15-0R7680.768USMRCT1215G15-34R834.800USMRCT1215G15-14711470.000
USMRCT1215G15-0R7870.787USMRCT1215G15-35R735.700USMRCT1215G15-15011500.000
USMRCT1215G15-0R8060.806USMRCT1215G15-36R036.000USMRCT1215G15-15411540.000
USMRCT1215G15-0R8200.820USMRCT1215G15-36R536.500USMRCT1215G15-15811580.000
USMRCT1215G15-0R8250.825USMRCT1215G15-37R437.400USMRCT1215G15-16011600.000
USMRCT1215G15-0R8450.845USMRCT1215G15-38R338.300USMRCT1215G15-16211620.000
USMRCT1215G15-0R8660.866USMRCT1215G15-39R039.000USMRCT1215G15-16511650.000
USMRCT1215G15-0R8870.887USMRCT1215G15-39R239.200USMRCT1215G15-16911690.000
USMRCT1215G15-0R9090.909USMRCT1215G15-40R240.200USMRCT1215G15-17411740.000
USMRCT1215G15-0R9100.910USMRCT1215G15-41R241.200USMRCT1215G15-17811780.000
USMRCT1215G15-0R9310.931USMRCT1215G15-42R242.200USMRCT1215G15-18011800.000
USMRCT1215G15-0R9530.953USMRCT1215G15-43R043.000USMRCT1215G15-18211820.000
USMRCT1215G15-0R9760.976USMRCT1215G15-43R243.200USMRCT1215G15-18711870.000
USMRCT1215G15-1R001.000USMRCT1215G15-44R244.200USMRCT1215G15-19111910.000
USMRCT1215G15-1R021.020USMRCT1215G15-45R345.300USMRCT1215G15-19611960.000
USMRCT1215G15-1R051.050USMRCT1215G15-46R446.400USMRCT1215G15-20012000.000
USMRCT1215G15-1R071.070USMRCT1215G15-47R047.000USMRCT1215G15-20512050.000
USMRCT1215G15-1R101.100USMRCT1215G15-47R547.500USMRCT1215G15-21012100.000
USMRCT1215G15-1R131.130USMRCT1215G15-48R748.700USMRCT1215G15-21512150.000
USMRCT1215G15-1R151.150USMRCT1215G15-49R949.900USMRCT1215G15-22012200.000
USMRCT1215G15-1R181.180USMRCT1215G15-50R050.000USMRCT1215G15-22112210.000
USMRCT1215G15-1R201.200USMRCT1215G15-51R051.000USMRCT1215G15-22612260.000
USMRCT1215G15-1R211.210USMRCT1215G15-51R151.100USMRCT1215G15-23212320.000
USMRCT1215G15-1R241.240USMRCT1215G15-52R352.300USMRCT1215G15-23712370.000
USMRCT1215G15-1R271.270USMRCT1215G15-53R653.600USMRCT1215G15-24012400.000
USMRCT1215G15-1R301.300USMRCT1215G15-54R954.900USMRCT1215G15-24312430.000
USMRCT1215G15-1R331.330USMRCT1215G15-56R056.000USMRCT1215G15-24912490.000
USMRCT1215G15-1R371.370USMRCT1215G15-56R256.200USMRCT1215G15-25512550.000
USMRCT1215G15-1R401.400USMRCT1215G15-57R657.600USMRCT1215G15-26112610.000
USMRCT1215G15-1R431.430USMRCT1215G15-59R059.000USMRCT1215G15-26712670.000
USMRCT1215G15-1R471.470USMRCT1215G15-60R460.400USMRCT1215G15-27012700.000
USMRCT1215G15-1R501.500USMRCT1215G15-61R961.900USMRCT1215G15-27412740.000
USMRCT1215G15-1R541.540USMRCT1215G15-62R062.000USMRCT1215G15-28012800.000
USMRCT1215G15-1R581.580USMRCT1215G15-63R463.400USMRCT1215G15-28712870.000
USMRCT1215G15-1R601.600USMRCT1215G15-64R964.900USMRCT1215G15-29412940.000
USMRCT1215G15-1R621.620USMRCT1215G15-66R566.500USMRCT1215G15-30013000.000
USMRCT1215G15-1R651.650USMRCT1215G15-68R068.000USMRCT1215G15-30113010.000
USMRCT1215G15-1R691.690USMRCT1215G15-68R168.100USMRCT1215G15-30913090.000
USMRCT1215G15-1R741.740USMRCT1215G15-69R869.800USMRCT1215G15-31613160.000
USMRCT1215G15-1R781.780USMRCT1215G15-71R571.500USMRCT1215G15-32413240.000
USMRCT1215G15-1R801.800USMRCT1215G15-73R273.200USMRCT1215G15-33213320.000
USMRCT1215G15-1R821.820USMRCT1215G15-75R075.000USMRCT1215G15-34013400.000
USMRCT1215G15-1R871.870USMRCT1215G15-76R876.800USMRCT1215G15-34813480.000
USMRCT1215G15-1R911.910USMRCT1215G15-78R778.700USMRCT1215G15-35713570.000
USMRCT1215G15-1R961.960USMRCT1215G15-80R680.600USMRCT1215G15-36013600.000
USMRCT1215G15-2R002.000USMRCT1215G15-82R082.000USMRCT1215G15-36513650.000
USMRCT1215G15-2R052.050USMRCT1215G15-82R582.500USMRCT1215G15-37413740.000
USMRCT1215G15-2R102.100USMRCT1215G15-84R584.500USMRCT1215G15-38313830.000
USMRCT1215G15-2R152.150USMRCT1215G15-86R686.600USMRCT1215G15-39013900.000
USMRCT1215G15-2R202.200USMRCT1215G15-88R788.700USMRCT1215G15-39213920.000
USMRCT1215G15-2R212.210USMRCT1215G15-90R990.900USMRCT1215G15-40214020.000
USMRCT1215G15-2R262.260USMRCT1215G15-91R091.000USMRCT1215G15-41214120.000
USMRCT1215G15-2R322.320USMRCT1215G15-93R193.100USMRCT1215G15-42214220.000
USMRCT1215G15-2R372.370USMRCT1215G15-95R395.300USMRCT1215G15-43014300.000
USMRCT1215G15-2R402.400USMRCT1215G15-97R697.600USMRCT1215G15-43214320.000
USMRCT1215G15-2R432.430USMRCT1215G15-1000100.000USMRCT1215G15-44214420.000
USMRCT1215G15-2R492.490USMRCT1215G15-1020102.000USMRCT1215G15-45314530.000
USMRCT1215G15-2R552.550USMRCT1215G15-1050105.000USMRCT1215G15-46414640.000
USMRCT1215G15-2R612.610USMRCT1215G15-1070107.000USMRCT1215G15-47014700.000
USMRCT1215G15-2R672.670USMRCT1215G15-1100110.000USMRCT1215G15-47514750.000
USMRCT1215G15-2R702.700USMRCT1215G15-1130113.000USMRCT1215G15-48714870.000
USMRCT1215G15-2R742.740USMRCT1215G15-1150115.000USMRCT1215G15-49914990.000
USMRCT1215G15-2R802.800USMRCT1215G15-1180118.000USMRCT1215G15-50015000.000
USMRCT1215G15-2R872.870USMRCT1215G15-1200120.000USMRCT1215G15-51015100.000
USMRCT1215G15-2R942.940USMRCT1215G15-1210121.000USMRCT1215G15-51115110.000
USMRCT1215G15-3R003.000USMRCT1215G15-1240124.000USMRCT1215G15-52315230.000
USMRCT1215G15-3R013.010USMRCT1215G15-1270127.000USMRCT1215G15-53615360.000
USMRCT1215G15-3R093.090USMRCT1215G15-1300130.000USMRCT1215G15-54915490.000
USMRCT1215G15-3R163.160USMRCT1215G15-1330133.000USMRCT1215G15-56015600.000
USMRCT1215G15-3R243.240USMRCT1215G15-1370137.000USMRCT1215G15-56215620.000
USMRCT1215G15-3R323.320USMRCT1215G15-1400140.000USMRCT1215G15-57615760.000
USMRCT1215G15-3R403.400USMRCT1215G15-1430143.000USMRCT1215G15-59015900.000
USMRCT1215G15-3R483.480USMRCT1215G15-1470147.000USMRCT1215G15-60416040.000
USMRCT1215G15-3R573.570USMRCT1215G15-1500150.000USMRCT1215G15-61916190.000
USMRCT1215G15-3R603.600USMRCT1215G15-1540154.000USMRCT1215G15-62016200.000
USMRCT1215G15-3R653.650USMRCT1215G15-1580158.000USMRCT1215G15-63416340.000
USMRCT1215G15-3R743.740USMRCT1215G15-1600160.000USMRCT1215G15-64916490.000
USMRCT1215G15-3R833.830USMRCT1215G15-1620162.000USMRCT1215G15-66516650.000
USMRCT1215G15-3R903.900USMRCT1215G15-1650165.000USMRCT1215G15-68016800.000
USMRCT1215G15-3R923.920USMRCT1215G15-1690169.000USMRCT1215G15-68116810.000
USMRCT1215G15-4R024.020USMRCT1215G15-1740174.000USMRCT1215G15-69816980.000
USMRCT1215G15-4R124.120USMRCT1215G15-1780178.000USMRCT1215G15-71517150.000
USMRCT1215G15-4R224.220USMRCT1215G15-1800180.000USMRCT1215G15-73217320.000
USMRCT1215G15-4R304.300USMRCT1215G15-1820182.000USMRCT1215G15-75017500.000
USMRCT1215G15-4R324.320USMRCT1215G15-1870187.000USMRCT1215G15-76817680.000
USMRCT1215G15-4R424.420USMRCT1215G15-1910191.000USMRCT1215G15-78717870.000
USMRCT1215G15-4R534.530USMRCT1215G15-1960196.000USMRCT1215G15-80618060.000
USMRCT1215G15-4R644.640USMRCT1215G15-2000200.000USMRCT1215G15-82018200.000
USMRCT1215G15-4R704.700USMRCT1215G15-2050205.000USMRCT1215G15-82518250.000
USMRCT1215G15-4R754.750USMRCT1215G15-2100210.000USMRCT1215G15-84518450.000
USMRCT1215G15-4R874.870USMRCT1215G15-2150215.000USMRCT1215G15-86618660.000
USMRCT1215G15-4R994.990USMRCT1215G15-2200220.000USMRCT1215G15-88718870.000
USMRCT1215G15-5R005.000USMRCT1215G15-2210221.000USMRCT1215G15-90919090.000
USMRCT1215G15-5R105.100USMRCT1215G15-2260226.000USMRCT1215G15-91019100.000
USMRCT1215G15-5R115.110USMRCT1215G15-2320232.000USMRCT1215G15-93119310.000
USMRCT1215G15-5R235.230USMRCT1215G15-2370237.000USMRCT1215G15-95319530.000
USMRCT1215G15-5R365.360USMRCT1215G15-2400240.000USMRCT1215G15-97619760.000
USMRCT1215G15-5R495.490USMRCT1215G15-2430243.000USMRCT1215G15-100210000.000
USMRCT1215G15-5R605.600USMRCT1215G15-2490249.000USMRCT1215G15-102210200.000
USMRCT1215G15-5R625.620USMRCT1215G15-2550255.000USMRCT1215G15-105210500.000
USMRCT1215G15-5R765.760USMRCT1215G15-2610261.000USMRCT1215G15-107210700.000
USMRCT1215G15-5R905.900USMRCT1215G15-2670267.000USMRCT1215G15-110211000.000
USMRCT1215G15-6R046.040USMRCT1215G15-2700270.000USMRCT1215G15-113211300.000
USMRCT1215G15-6R196.190USMRCT1215G15-2740274.000USMRCT1215G15-115211500.000
USMRCT1215G15-6R206.200USMRCT1215G15-2800280.000USMRCT1215G15-118211800.000
USMRCT1215G15-6R346.340USMRCT1215G15-2870287.000USMRCT1215G15-120212000.000
USMRCT1215G15-6R496.490USMRCT1215G15-2940294.000USMRCT1215G15-121212100.000
USMRCT1215G15-6R656.650USMRCT1215G15-3000300.000USMRCT1215G15-124212400.000
USMRCT1215G15-6R806.800USMRCT1215G15-3010301.000USMRCT1215G15-127212700.000
USMRCT1215G15-6R816.810USMRCT1215G15-3090309.000USMRCT1215G15-130213000.000
USMRCT1215G15-6R986.980USMRCT1215G15-3160316.000USMRCT1215G15-133213300.000
USMRCT1215G15-7R157.150USMRCT1215G15-3240324.000USMRCT1215G15-137213700.000
USMRCT1215G15-7R327.320USMRCT1215G15-3320332.000USMRCT1215G15-140214000.000
USMRCT1215G15-7R507.500USMRCT1215G15-3400340.000USMRCT1215G15-143214300.000
USMRCT1215G15-7R687.680USMRCT1215G15-3480348.000USMRCT1215G15-147214700.000
USMRCT1215G15-7R877.870USMRCT1215G15-3570357.000USMRCT1215G15-150215000.000
USMRCT1215G15-8R068.060USMRCT1215G15-3600360.000USMRCT1215G15-154215400.000
USMRCT1215G15-8R208.200USMRCT1215G15-3650365.000USMRCT1215G15-158215800.000
USMRCT1215G15-8R258.250USMRCT1215G15-3740374.000USMRCT1215G15-160216000.000
USMRCT1215G15-8R458.450USMRCT1215G15-3830383.000USMRCT1215G15-162216200.000
USMRCT1215G15-8R668.660USMRCT1215G15-3900390.000USMRCT1215G15-165216500.000
USMRCT1215G15-8R878.870USMRCT1215G15-3920392.000USMRCT1215G15-169216900.000
USMRCT1215G15-9R099.090USMRCT1215G15-4020402.000USMRCT1215G15-174217400.000
USMRCT1215G15-9R109.100USMRCT1215G15-4120412.000USMRCT1215G15-178217800.000
USMRCT1215G15-9R319.310USMRCT1215G15-4220422.000USMRCT1215G15-180218000.000
USMRCT1215G15-9R539.530USMRCT1215G15-4300430.000USMRCT1215G15-182218200.000
USMRCT1215G15-9R769.760USMRCT1215G15-4320432.000USMRCT1215G15-187218700.000
USMRCT1215G15-10R010.000USMRCT1215G15-4420442.000USMRCT1215G15-191219100.000
USMRCT1215G15-10R210.200USMRCT1215G15-4530453.000USMRCT1215G15-196219600.000
USMRCT1215G15-10R510.500USMRCT1215G15-4640464.000USMRCT1215G15-200220000.000
USMRCT1215G15-10R710.700USMRCT1215G15-4700470.000USMRCT1215G15-205220500.000
USMRCT1215G15-11R011.000USMRCT1215G15-4750475.000USMRCT1215G15-210221000.000
USMRCT1215G15-11R311.300USMRCT1215G15-4870487.000USMRCT1215G15-215221500.000
USMRCT1215G15-11R511.500USMRCT1215G15-4990499.000USMRCT1215G15-220222000.000
USMRCT1215G15-11R811.800USMRCT1215G15-5000500.000USMRCT1215G15-221222100.000
USMRCT1215G15-12R012.000USMRCT1215G15-5100510.000USMRCT1215G15-226222600.000
USMRCT1215G15-12R112.100USMRCT1215G15-5110511.000USMRCT1215G15-232223200.000
USMRCT1215G15-12R412.400USMRCT1215G15-5230523.000USMRCT1215G15-237223700.000
USMRCT1215G15-12R712.700USMRCT1215G15-5360536.000USMRCT1215G15-240224000.000
USMRCT1215G15-13R013.000USMRCT1215G15-5490549.000USMRCT1215G15-243224300.000
USMRCT1215G15-13R313.300USMRCT1215G15-5600560.000USMRCT1215G15-249224900.000
USMRCT1215G15-13R713.700USMRCT1215G15-5620562.000USMRCT1215G15-255225500.000
USMRCT1215G15-14R014.000USMRCT1215G15-5760576.000USMRCT1215G15-261226100.000
USMRCT1215G15-14R314.300USMRCT1215G15-5900590.000USMRCT1215G15-267226700.000
USMRCT1215G15-14R714.700USMRCT1215G15-6040604.000USMRCT1215G15-270227000.000
USMRCT1215G15-15R015.000USMRCT1215G15-6190619.000USMRCT1215G15-274227400.000
USMRCT1215G15-15R415.400USMRCT1215G15-6200620.000USMRCT1215G15-280228000.000
USMRCT1215G15-15R815.800USMRCT1215G15-6340634.000USMRCT1215G15-287228700.000
USMRCT1215G15-16R016.000USMRCT1215G15-6490649.000USMRCT1215G15-294229400.000
USMRCT1215G15-16R216.200USMRCT1215G15-6650665.000USMRCT1215G15-300230000.000
USMRCT1215G15-16R516.500USMRCT1215G15-6800680.000USMRCT1215G15-301230100.000
USMRCT1215G15-16R916.900USMRCT1215G15-6810681.000USMRCT1215G15-309230900.000
USMRCT1215G15-17R417.400USMRCT1215G15-6980698.000USMRCT1215G15-316231600.000
USMRCT1215G15-17R817.800USMRCT1215G15-7150715.000USMRCT1215G15-324232400.000
USMRCT1215G15-18R018.000USMRCT1215G15-7320732.000USMRCT1215G15-332233200.000
USMRCT1215G15-18R218.200USMRCT1215G15-7500750.000USMRCT1215G15-340234000.000
USMRCT1215G15-18R718.700USMRCT1215G15-7680768.000USMRCT1215G15-348234800.000
USMRCT1215G15-19R119.100USMRCT1215G15-7870787.000USMRCT1215G15-357235700.000
USMRCT1215G15-19R619.600USMRCT1215G15-8060806.000USMRCT1215G15-360236000.000
USMRCT1215G15-20R020.000USMRCT1215G15-8200820.000USMRCT1215G15-365236500.000
USMRCT1215G15-20R520.500USMRCT1215G15-8250825.000USMRCT1215G15-374237400.000
USMRCT1215G15-21R021.000USMRCT1215G15-8450845.000USMRCT1215G15-383238300.000
USMRCT1215G15-21R521.500USMRCT1215G15-8660866.000USMRCT1215G15-390239000.000
USMRCT1215G15-22R022.000USMRCT1215G15-8870887.000USMRCT1215G15-392239200.000


[an error occurred while processing this directive]
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case-by-case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Items available from stock are delivered within 2-3 days ARO. For same day delivery, a $25.00 rush charge -RSC is added to the invoice.
SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.


Last updated: November 11, 2010
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2018 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.