Microwave thin film chip resistors RE4000-5M1 ceramic Al2O3 substrate thin film resistors for microwave applications manufactured by US Microwaves Microwave thin film chip resistors RE4000-5M1 ceramic Al2O3 substrate thin film resistors for microwave applications manufactured by US Microwaves Microwave thin film chip resistors RE4000-5M1 ceramic Al2O3 substrate thin film resistors for microwave applications manufactured by US Microwaves US MICROWAVESAdvanced Microwave Components MICROWAVE CERAMIC SUBSTRATE THIN FILM RESISTORSUSM RE4000-5M1 FEATURES APPLICATIONS CERAMIC RESISTOR Wide resistance range 0.1W to MW Good TCR tracking Low capacitance value Available in die form and shipped in waffle packs Biasing discrete transistors circuits Feedback resistors for amplifiers Chip & wire hybrid circuits Surface mount circuits SHORT PRODUCT APPLICATION NOTE The RE4000-5M1 series of microwave thin film resistors is designed to be used in microwave hybrid circuits for biasing of active components. These devices can be used over the full military temperature range -55C to +125C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% tested, visual inspected and packaged in waffle packs. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10.000W/sq. Resistors from 0.1W to x MW range are available. The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/C typical. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1W/sq to 10,000W/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. ELECTRICAL CHARACTERISTICS PARAMETERVALUEUNITS Tolerance1,5,10% Resistance value 0.1 to 91000 W TCR, -55 to +125 Ctyp.75ppm/C Capacitance, maximum0.162pF Operating Voltage,-55 to +125 C, 50W resistor62.7 Vdc Power Rating (per resistor) @70C (Derate linearly to zero @150C)39.30mW Insulation Resistance @25C3.01012 W GENERAL DIE INFORMATION SubstrateThickness (mils)Die size (mils)ResistorBonding padsBackside metal Ceramic Al2O310140x402The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary.The bonding pads of the resistors are 3m thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400C in air without loss of adhesion.The backside of the die is metallized with TiW/Au which is compatible with most die attaching methods. Other metallizations are available upon special request. All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For high volume automated assembly, MTR chip resistors (5% and 10% tolerance only) are supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). DIE LAYOUT - MECHANICAL SPECIFICATIONS STANDARD PRODUCTS ORDERING INFORMATION PART NUMBER BUILDER RQ1020-xxPx-q% R1R1 multiplierTOLERANCEPACKAGE R1 value101112131516182022242730333639434751566268758291 R1 multiplier0.010.11101001,000 -10%-5%-1% -WP Find part # USM PART #QUANTITYToleranceWAFLE PACKS U/P($)ToleranceWAFLE PACKS U/P($)ToleranceWAFLE PACKS U/P($) USM RE4000-5M11,000pc-1%-WP$-5%-WP$-10%-WP$ USM RE4000-5M12,000pc-1%-WP$-5%-WP$-10%-WP$ USM RE4000-5M15,000pc-1%-WP$-5%-WP$-10%-WP$ USM RE4000-5M110,000pc-1%-WP$-5%-WP$-10%-WP$ Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. INSTANT QUOTE USM P/NQuantityE-mail Delivery for packaged Resistor networks standard products is 4-6 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by US MICROWAVES sales department in writing before, becoming non cancelable binding contracts. US MICROWAVES guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met. US MICROWAVES has made every effort to have this information as accurate as possible. However, no responsibility is assumed by US MICROWAVES for its use, nor for any infringements of rights of third parties which may result from its use. US MICROWAVES reserves the right to revise the content or modify its product line without prior notice. US MICROWAVES products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent. HomeProduct TreeTech. SupportPrint PDFRequest QuoteInventoryPlace OrderContact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.

 
 
US MICROWAVES
Advanced Microwave Components
  MICROWAVE CERAMIC SUBSTRATE
THIN FILM RESISTORS

USM RE4000-5M1
 
 

FEATURES
APPLICATIONS
CERAMIC RESISTOR
Wide resistance range 0.1W to MW
Good TCR tracking
Low capacitance value
Available in die form and shipped in waffle packs
Biasing discrete transistors circuits
Feedback resistors for amplifiers
Chip & wire hybrid circuits
Surface mount circuits
microwave ceramic substrate thin film chip resistor

SHORT PRODUCT APPLICATION NOTE
The RE4000-5M1 series of microwave thin film resistors is designed to be used in microwave hybrid circuits for biasing of active components. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% tested, visual inspected and packaged in waffle packs. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10.000W/sq. Resistors from 0.1W to x MW range are available.
The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/C typical.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1W/sq to 10,000W/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.
All US Microwaves products are manufactured using GOLDCHIP TECHNOLOGY™ a trade mark of Semiconix Corporation.

ELECTRICAL CHARACTERISTICS
PARAMETER VALUE UNITS
Tolerance 1,5,10 %
Resistance value 0.1 to 91000 W
TCR, -55 to +125 °C typ.75 ppm/°C
Capacitance, maximum 0.162 pF
Operating Voltage,-55 to +125 °C, 50W resistor 62.7 Vdc
Power Rating (per resistor) @70°C (Derate linearly to zero @150°C) 39.30 mW
Insulation Resistance @25°C 3.0·1012 W

GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Resistor Bonding pads Backside metal
Ceramic
Al2O3
10±1 40x40±2 The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. The bonding pads of the resistors are 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is metallized with TiW/Au which is compatible with most die attaching methods. Other metallizations are available upon special request.
All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For high volume automated assembly, MTR chip resistors (5% and 10% tolerance only) are supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).

DIE LAYOUT - MECHANICAL SPECIFICATIONS
microwave ceramic substrate thin film chip resistor

STANDARD PRODUCTS ORDERING INFORMATION

PART NUMBER BUILDER RQ1020-xxPx-q%
R1 R1 multiplier TOLERANCE PACKAGE
Find part #

USM PART # QUANTITY Tolerance WAFLE PACKS U/P($) Tolerance WAFLE PACKS U/P($) Tolerance WAFLE PACKS U/P($)
USM RE4000-5M1 1,000pc -1% -WP $ -5% -WP $ -10% -WP $
USM RE4000-5M1 2,000pc -1% -WP $ -5% -WP $ -10% -WP $
USM RE4000-5M1 5,000pc -1% -WP $ -5% -WP $ -10% -WP $
USM RE4000-5M1 10,000pc -1% -WP $ -5% -WP $ -10% -WP $
List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

INSTANT QUOTE
USM P/N Quantity E-mail    
 

ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.

Home Product Tree Tech. Support Print PDF Request Quote Inventory Place Order Contact sales

Last updated: July 06, 2009
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2018 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.