FLIP CHIP RESISTORS - MICROWAVE THIN FILM CHIP RESISTORS for f >20GHz APPLICATIONS -20GHz - thin film resistors for microwave and transimpedance amplifiers for optical communication receivers RG1025-xx-FC The RG1025-xx-FC series of microwave thin film chip resistors is designed to be used in microwave hybrid circuits for biasing of active components and as feedback resistors for high speed  transimpedance amplifiers for optical communication receivers. To attain very low capacitance to ground, these chip resistors are manufactured on 10 mils Al2O3ceramic substrates and do not have backside metallization. In addition of the regular RG1025-xx  series, RG1025-xx-FC has a protective dielectric coating that prevents shorting due to the conductive epoxy.These devices are specifically designed and manufactured to be compatible with flip chip conductive epoxy mounting. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Devices are 100% tested, visual inspected and packaged in waffle packs. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq.Custom lab kits are available: RG Lab kit.The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary.The bonding pads of the resistors are 3m m thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is NOT metallized. Standard TiW/Au or other custom metallizations are available upon special request.
top logo

FLIP CHIP RESISTORS - MICROWAVE THIN FILM CHIP RESISTORS
FOR f >20GHz APPLICATIONS

20GHz - thin film resistors for microwave and transimpedance amplifiers for optical communication receivers RG1025-FC

The RG1025-FC series of microwave thin film chip resistors is designed to be used in microwave hybrid circuits for biasing of active components and as feedback resistors for high speed  transimpedance amplifiers for optical communication receivers. To attain very low capacitance to ground, these chip resistors are manufactured on 10 mils Al2O3ceramic substrates and do not have backside metallization. In addition of the regular RG1025-xx  series, RG1025-xx-FC has a protective dielectric coating that prevents shorting due to the conductive epoxy.

These devices are specifically designed and manufactured to be compatible with flip chip conductive epoxy mounting. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Devices are 100% tested, visual inspected and packaged in waffle packs. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq.


R=0.1 to 3.5 sq
Custom lab kits are available: RG Lab kit

R(W) USM Part # R(W) USM Part # R(W) USM Part #
1.0 RG1025-1P0-FC 10 RG1025-10P0-FC 100 RG1025-100P0-FC
1.2 RG1025-1P2-FC 12 RG1025-12P0-FC 120 RG1025-120P0-FC
1.5 RG1025-1P5-FC 15 RG1025-15P0-FC 150 RG1025-150P0-FC
1.8 RG1025-1P8-FC 18 RG1025-18P0-FC 180 RG1025-180P0-FC
2.2 RG1025-2P2-FC 22 RG1025-22P0-FC 220 RG1025-220P0-FC
2.7 RG1025-2P7-FC 27 RG1025-27P0-FC 270 RG1025-270P0-FC
3.3 RG1025-3P3-FC 33 RG1025-33P0-FC 330 RG1025-330P0-FC
3.9 RG1025-3P9-FC 39 RG1025-39P0-FC 390 RG1025-390P0-FC
4.7 RG1025-4P7-FC 47 RG1025-47P0-FC 470 RG1025-470P0-FC
5.0 RG1025-5P0-FC 50 RG1025-50P0-FC 500 RG1025-500P0-FC
5.6 RG1025-5P6-FC 56 RG1025-56P0-FC 560 RG1025-560P0-FC
6.8 RG1025-6P8-FC 68 RG1025-68P0-FC 680 RG1025-680P0-FC
7.5 RG1025-7P5-FC 75 RG1025-75P0-FC 750 RG1025-750P0-FC
8.2 RG1025-8P2-FC 82 RG1025-82P0-FC 820 RG1025-820P0-FC

SUBSTRATE INFORMATION RESISTOR SPECIFICATIONS
Material Thickness
(mils)
Die size
(mils)
Power rating
(mW@70°C)
Tolerances
(
q%)
Capacitance
(pF)
RC constant (sec)
(R=1k
W)
Al2O3, 99.6% 10±1 (25±2)x(10±2) 190 1, 5, 10 0.034 3.40E-11

PROCESS INFORMATION
Resistor Conductor Backside metallization
The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. The bonding pads of the resistors are 3m m thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is NOT metallized. Standard TiW/Au or other custom metallizations are available upon special request.

ORDERING INFORMATION RG1025-xxPx-FC-q%

TOLERANCE q MINIMUM ORDER/line item U/P($) >1K U/P($) >5K U/P($) >10K U/P($) >50K U/P($) >100K DELIVERY
10% $320 / 300 pc 0.69 0.60 0.54 0.50 0.35 3-4 weeks ARO for 5% and 10% tolerance. Certain items are available from Stock
5% $320 / 200 pc 1.04 0.90 0.83 0.74 0.51
1% Not available for Flip Chip version - - - - -

US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026 Fax:(408)986-8027

©1990-2024 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.