top logo



The R1020-S series of microwave thin film resistors is designed to be used in microwave hybrid circuits for biasing of active components. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% tested, visual inspected and packaged in waffle packs. US Microwaves employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10.000W /sq. Resistors from 0.1W to x MW range are available.

R(W) USM Part # R(W) USM Part # R(W) USM Part # R(W) USM Part #
1.0 R1020-S-1P0 10 R1020-S-10P0 100 R1020-S-100P0 1000 R1020-S-1000
1.2 R1020-S-1P2 12 R1020-S-12P0 120 R1020-S-120P0 1200 R1020-S-1200
1.5 R1020-S-1P5 15 R1020-S-15P0 150 R1020-S-150P0 1500 R1020-S-1500
1.8 R1020-S-1P8 18 R1020-S-18P0 180 R1020-S-180P0 1800 R1020-S-1800
2.2 R1020-S-2P2 22 R1020-S-22P0 220 R1020-S-220P0 2200 R1020-S-2200
2.7 R1020-S-2P7 27 R1020-S-27P0 270 R1020-S-270P0 2700 R1020-S-2700
3.3 R1020-S-3P3 33 R1020-S-33P0 330 R1020-S-330P0 3300 R1020-S-3300
3.9 R1020-S-3P9 39 R1020-S-39P0 390 R1020-S-390P0 3900 R1020-S-3900
4.7 R1020-S-4P7 47 R1020-S-47P0 470 R1020-S-470P0 4700 R1020-S-4700
5.0 R1020-S-5P0 50 R1020-S-50P0 500 R1020-S-500P0 5000 R1020-S-5000
5.6 R1020-S-5P6 56 R1020-S-56P0 560 R1020-S-560P0 5600 R1020-S-5600
6.8 R1020-S-6P8 68 R1020-S-68P0 680 R1020-S-680P0 6800 R1020-S-6800
7.5 R1020-S-7P5 75 R1020-S-75P0 750 R1020-S-750P0 7500 R1020-S-7500
8.2 R1020-S-8P2 82 R1020-S-82P0 820 R1020-S-820P0 8200 R1020-S-8200

Material Thickness (mils) Die size (mils) Power rating Tolerances q% Capacitance
SiO2/Silicon 10 ±1 (10±2)x(20±2) 50mW@70°C 1, 5, 10 <0.5pF

Resistor Conductor Backside metallization
The resistive material is high stability Tantalum Nitride with low temperature coefficient of resistance, <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. The bonding pads of the resistors are 3m thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. The backside of the die is metallized with TiW/Au which is compatible with most die attaching methods. Other metallizations are available upon special request.


TOLERANCE q MINIMUM ORDER U/P($) /1K U/P($) /5K U/P($) /10K U/P($) /50K U/P($) /100K DELIVERY ORDER
10% 2 weeks ARO for 5% and 10% tolerance and 3-4 weeks ARO for 1%. Certain items are available from Stock

US MICROWAVES Tel:(408)986-8026 Fax:(408)986-8027

©1990-2024 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.