MICROWAVE CERAMIC CHIP CAPACITORS K-xxx GHz SINGLE LAYER CERAMIC CHIP CAPACITORS Low to very High capacitance values, low inductance, high Q for RF, microwave & millimeter wave, by-pass and D.C. blocking applications. Temperature Coefficient is (TC) = +10% -95% maximum change (non-linear). Dielectric Constant (K) = xxx. Capacitance values from 25 pF to 2500 pF. Standard electrode metallization is Gold over Nickel compatible with epoxy, AuGe, AuSn die attaching and thermal compression or ultrasonic wire bonding. Gold over platinum is available on special request with custom designs. Custom designs that match 50 ohm line widths of the capacitors with various dielectrics K or different die sizes L or W are available: Custom-CERAMIC CHIP CAPACITORS Capacitors kits are also available: CERAMIC CHIP CAPACITORS LAB-Kit. ELECTRICAL CHARACTERISTICS OPERATING FREQUENCY Up to 50 GHz CAPACITANCE VALUES 25 pF to 2500 pF STANDARD MEASUREMENT FREQUENCY 1 MHz for values < or equal to 100 pF; 1 kHz for values >100 pF INSULATION RESISTANCE (IR) 1011 Ohms min. at 25°C TEMPERATURE COEFFICIENT (TC) 0±30 PPM/°C (non-linear). Rated Voltage: 100 V STANDARD TOLERANCES ±20% SUBSTRATE INFORMATION Material Ceramic with High K dielectric constant 7 mils thick Relative Permittivity K=xxx Front side / Backside metallization Standard electrode metallization is Gold over Nickel compatible with epoxy, AuGe, AuSn die attaching and thermal compression or ultrasonic wire bonding. Gold over platinum is available on special request with custom designs.

 
 
US MICROWAVES
Advanced Microwave Components
  CERAMIC CHIP CAPACITORS engineering design kits
 
 


US Microwaves recognizes the importance of Lab Kits for its Customers. Since the range of p/n is wide, we found that it is more practical for our customers to choose their own devices in a kit. The following constrains do apply:
-Maximum number of different p/n in a kit is 4 (four).
-Minimum quantity in a kit is 100 pc.
Customers may select up to 4 different p/n, fill out desired quantities for each p/n and send request for quote from link "RFQ “.
ceramic microwave thin film chip resistor
Actual die layout may vary

C type Value Multiplier Tolerance P/N Qty

ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application.

US MICROWAVES guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

US MICROWAVES has made every effort to have this information as accurate as possible. However, no responsibility is assumed by US MICROWAVES for its use, nor for any infringements of rights of third parties which may result from its use. US MICROWAVES reserves the right to revise the content or modify its product line without prior notice. US MICROWAVES products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.


Home>Web Navigation> Last update: June 30, 2009
US MICROWAVES Tel:(408)758-8690 Fax:(408)986-8027
©1990-2024 US MICROWAVES All rights reserved.
No material from this site may be used or reproduced without permission.