|
USMK-1500-XXX-ccc - GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) - Microwave SLCC - Single Layer Ceramic Capacitors F> 50 GHz K-1500 ceramic DC blocking capacitors series
USMK-1500-XXX-ccc - GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) - Microwave SLCC - Single Layer Ceramic Capacitors F> 50 GHz K-1500 ceramic DC blocking capacitors series US MICROWAVES GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) Advanced Microwave Components USMK-1500-XXX-ccc FEATURES APPLICATIONS SINGLE LAYER CERAMIC CAPACITOR (SLCC) Low to very High capacitance values. Low inductance. High Q for RF. Microwave & millimeter wave. By-pass and D.C. blocking applications. RF Bypass, DC Blocking, Filters, Submounts GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) USMK-1500-XXX-ccc PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE US Microwaves USMK-1500-XXX-ccc series SLCC - single layer ceramic chip capacitors - are available from low to very High capacitance values, with low inductance, high Q for RF, microwave & millimeter wave, by-pass and D.C. blocking applications. Temperature Coefficient is (TC) = +10% -95% maximum change (non-linear). Dielectric Constant (K) = 1500. Capacitance values from 5pF to 540pF. Standard electrode metallization is Gold over Nickel compatible with epoxy, AuGe, AuSn die attaching and thermal compression or ultrasonic wire bonding. Gold over platinum is available on special request with custom designs. Custom designs that match 50 ohm line widths of the capacitors with various dielectrics K or different die sizes L or W are available. Capacitors kits are also available: CERAMIC CHIP CAPACITORS LAB-Kit. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR-THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1ohm/sq to 10,000ohms/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Operating frequency > 50 GHz Capacitance value 5 to 540 pF Standard measurement frequency 1 (C< or equal to 100 pF) MHz Standard measurement frequency 1 (C> 100 pF) kHz Insulation resistance (IR) 1E11 min. at 25 °C Ohms Temperature coefficient (TC) 0±30 (non-linear) PPM/°C Rated Voltage: 100 V Standard tolerances ±10 % ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Bonding Pads Backside metal Ceramic K=1500 7±1 L x W ±2 Min. 4x4 mils, 3µm thick, 99.99% electroplated gold with a TiW barrier Standard electrode metallization is Gold over Nickel compatible with epoxy, AuGe, AuSn die attaching and thermal compression or ultrasonic wire bonding. Gold over platinum is available on special request with custom designs. All US Microwaves products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For high volume automated assembly, ceramic chip capacitors are supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SLCC DIE LAYOUT / MECHANICAL SPECIFICATIONS GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) USMK-1500-XXX-ccc SLCC CHIP MOUNT GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) USMK-1500-XXX-ccc ceramic chip capacitor mount SLCC ASSEMBLY PROCESS - SHORT APPLICATION NOTE US Microwaves ceramic chip capacitors are designed for thermosonic GOLD wire bonding and AuGe, AuSn or conductive silver epoxy die attach. In general, after die attach, prior to wire bonding operation an oxygen RF plasma clean operation is recommended. IMPORTANT NOTE: Aluminum wire should NOT be used with gold pads due to potential reliability problem known as purple plague. Same it applies to Aluminum bonding pads with gold wire! The following is an important note that applies to Surface Mount Multi Chip Modules. In the transition from SnPb solder to lead free and RoHS compliant packaging and assembly processes the reflow temperature has increased in some cases from 180°C to 220°C. This may cause an increase of the rate of formation of gold aluminum intermetallic compounds that are brittle and are conducive to increased contact resistance and or bond failure. This is one more reasons to avoid aluminum all together. TEMPERATURE CHARACTERISTICS GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) USMK-1500-XXX-ccc TEMPERATURE CHARACTERISTICS SLCC SERIES RESONANT FREQUENCY GHz SINGLE LAYER CERAMIC CHIP CAPACITORS (SLCC) USMK-1500-XXX-ccc SERIES RESONANT FREQUENCY STANDARD PRODUCTS ORDERING INFORMATION C [pF] C multiplier TOLERANCE PACKAGE Find part # STANDARD SIZES - PRODUCTS ORDERING INFORMATION USM P/N W [mil] L [mil] C(pF) MINIMUM ORDER U/P($) 1K U/P($) 5K U/P($) 10K U/P($) 50K U/P($) 100K K1500-010-5 10 10 5.00 $125/241 0.26 0.23 0.21 0.19 0.13 K1500-015-12 15 15 12.00 $125/218 0.29 0.25 0.23 0.21 0.14 K1500-020-22 20 20 22.00 $125/196 0.32 0.28 0.25 0.23 0.16 K1500-025-34 25 25 34.00 $125/176 0.36 0.31 0.28 0.26 0.18 K1500-030-49 30 30 49.00 $125/157 0.40 0.35 0.32 0.29 0.20 K1500-035-66 35 35 66.00 $125/141 0.44 0.39 0.35 0.32 0.22 K1500-040-90 40 40 90.00 $125/126 0.50 0.43 0.40 0.36 0.25 K1500-045-110 45 45 110.00 $125/113 0.55 0.48 0.44 0.40 0.28 K1500-050-130 50 50 130.00 $125/102 0.61 0.54 0.49 0.44 0.31 K1500-060-190 60 60 190.00 $125/83 0.75 0.66 0.60 0.54 0.38 K1500-070-270 70 70 270.00 $125/69 0.91 0.80 0.73 0.66 0.45 K1500-080-350 80 80 350.00 $125/58 1.09 0.95 0.87 0.79 0.54 K1500-090-440 90 90 440.00 $125/49 1.28 1.12 1.03 0.93 0.64 K1500-100-540 100 100 540.00 $125/42 1.50 1.31 1.20 1.09 0.75 STANDARD EIA-24 VALUES - PRODUCTS ORDERING INFORMATION USM P/N W[mils] L[mils] C[pf] USM P/N W[mils] L[mils] C[pf] USMK-1500-011-5P1 11 11 5.1 USMK-1500-033-510 33 33 51 USMK-1500-011-5P6 11 11 5.6 USMK-1500-035-560 35 35 56 USMK-1500-012-6P2 12 12 6.2 USMK-1500-036-620 36 36 62 USMK-1500-012-6P8 12 12 6.8 USMK-1500-038-680 38 38 68 USMK-1500-013-7P5 13 13 7.5 USMK-1500-040-750 40 40 75 USMK-1500-014-8P2 14 14 8.2 USMK-1500-042-820 42 42 82 USMK-1500-014-9P1 14 14 9.1 USMK-1500-044-910 44 44 91 USMK-1500-015-100 15 15 10 USMK-1500-046-101 46 46 100 USMK-1500-016-110 16 16 11 USMK-1500-048-111 48 48 110 USMK-1500-016-120 16 16 12 USMK-1500-050-121 50 50 120 USMK-1500-017-130 17 17 13 USMK-1500-052-131 52 52 130 USMK-1500-018-150 18 18 15 USMK-1500-056-151 56 56 150 USMK-1500-019-160 19 19 16 USMK-1500-058-161 58 58 160 USMK-1500-020-180 20 20 18 USMK-1500-062-181 62 62 180 USMK-1500-021-200 21 21 20 USMK-1500-065-201 65 65 200 USMK-1500-022-220 22 22 22 USMK-1500-068-221 68 68 220 USMK-1500-023-240 23 23 24 USMK-1500-071-241 71 71 240 USMK-1500-024-270 24 24 27 USMK-1500-075-271 75 75 270 USMK-1500-025-300 25 25 30 USMK-1500-079-301 79 79 300 USMK-1500-027-330 27 27 33 USMK-1500-083-331 83 83 330 USMK-1500-028-360 28 28 36 USMK-1500-087-361 87 87 360 USMK-1500-029-390 29 29 39 USMK-1500-090-391 90 90 390 USMK-1500-030-430 30 30 43 USMK-1500-095-431 95 95 430 USMK-1500-032-470 32 32 47 USMK-1500-099-471 99 99 470 USMK-1500-033-510 33 33 51 USMK-1500-103-511 103 103 510 Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Order on line at: http://www.usmicrowaves.com/porder.htm. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for die products packaged in waffle packs is 2-4 weeks ARO. For Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.
|
