|
USMZ50D-05-070500 - DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 500 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50D-05-070500,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit
USMZ50D-05-070500 - DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 500
mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3
alumina ceramic substrate manufactured by US Microwaves USMZ50D-05-070500,50 ohm impedance microstrip transmission
lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm
transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50D-05-070250 - DOUBLE Z50 50Ohms
Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 250 mils length - Low return loss optimised up to
50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US
Microwaves USMZ50D-05-070250,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission
lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit USMZ50D-05-070200 - DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 200 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip
transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50D-05-070200,50 ohm
impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission
lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return
loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50D-05-070150 - DOUBLE
Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 150 mils length - Low return loss
optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate
manufactured by US Microwaves USMZ50D-05-070150,50 ohm impedance microstrip transmission lines,50 ohm microstrip
transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit USMZ50D-05-070100 - DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 100 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip
transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50D-05-070100,50 ohm
impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission
lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return
loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50D-05-070050 - DOUBLE
Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width, 50 mils length - Low return loss
optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate
manufactured by US Microwaves USMZ50D-05-070050,50 ohm impedance microstrip transmission lines,50 ohm microstrip
transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm
lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on
chip,chip and wire,hybrid circuit US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic,
70 mils width, 50 mils length Advanced Microwave Components USMZ50D-05-070050 FEATURES APPLICATIONS 50Ω MICROSTRIP
TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different ceramic thickness and
overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use
50 ohm microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils
thick ceramic, 70 mils width, 50 mils length USMZ50D-05-070050-WP USMZ50D-05-070050 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070050 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070050
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 50 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070050 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 50x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 50 mils length USMZ50D-05-070050-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070050 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 50 mils length USMZ50D-05-070050-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 50 USMZ50D-05-070050-WP -WP 96 $8.37 USMZ50D-05-070050 50Ω MICROSTRIP TRANSMISSION LINES:
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are
subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD
qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070050-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
100 mils length Advanced Microwave Components USMZ50D-05-070100 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 100 mils length USMZ50D-05-070100-WP USMZ50D-05-070100 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070100 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070100
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 100 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070100 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 100x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 100 mils length USMZ50D-05-070100-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070100 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 100 mils length USMZ50D-05-070100-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 100 USMZ50D-05-070100-WP -WP 62 $12.96 USMZ50D-05-070100 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070100-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
150 mils length Advanced Microwave Components USMZ50D-05-070150 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 150 mils length USMZ50D-05-070150-WP USMZ50D-05-070150 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070150 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070150
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 150 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070150 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 150x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 150 mils length USMZ50D-05-070150-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070150 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 150 mils length USMZ50D-05-070150-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 150 USMZ50D-05-070150-WP -WP 45 $17.88 USMZ50D-05-070150 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070150-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
200 mils length Advanced Microwave Components USMZ50D-05-070200 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 200 mils length USMZ50D-05-070200-WP USMZ50D-05-070200 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070200 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070200
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 200 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070200 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 200x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 200 mils length USMZ50D-05-070200-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070200 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 200 mils length USMZ50D-05-070200-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 200 USMZ50D-05-070200-WP -WP 36 $22.38 USMZ50D-05-070200 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070200-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
250 mils length Advanced Microwave Components USMZ50D-05-070250 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 250 mils length USMZ50D-05-070250-WP USMZ50D-05-070250 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070250 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070250
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 250 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070250 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 250x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 250 mils length USMZ50D-05-070250-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070250 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 250 mils length USMZ50D-05-070250-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 250 USMZ50D-05-070250-WP -WP 30 $26.82 USMZ50D-05-070250 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070250-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils width,
500 mils length Advanced Microwave Components USMZ50D-05-070500 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss High reliability and ruggedness Available in different ceramic thickness and overall sizes.
Engineering Lab Kits available Custom Z50 sizes available upon request. Most microwave applications use 50 ohm
microstrip transmission lines as basic building block. DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 500 mils length USMZ50D-05-070500-WP USMZ50D-05-070500 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50D-05-070500 50 ohm microstrip transmission lines are basic building blocks
designed to be used in chip and wire microwave hybrid circuits. 50 ohms microstrip transmission lines are available in
different alumina ceramic thicknesses and different widths and lengths. 50 ohm microstrip transmission lines offer the
designer complete flexibility and repeatability for the most challenging RF and microwave applications. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50D-05-070500
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 4.7 mils Width 70 mils Length 500 mils Thickness 5 mils Operating Temperature Range -55 to
+125 °C Center to center distance d0 25 mils ONLY Proper die handling equipment and procedures should be employed.
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50D-05-070500 50Ω
MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside
metal Al2O3 Aluminum Oxide 5 500x70±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the
die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is
available for special orders. layout for DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick ceramic, 70 mils
width, 500 mils length USMZ50D-05-070500-WP All US Microwaves 50Ω microstrip transmission lines products are available
in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain
items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are
100% tested, visual inspected and shipped in waffle packs (WP). USMZ50D-05-070500 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH DOUBLE Z50 50Ohms Microstrip transmission lines, 5 mils thick
ceramic, 70 mils width, 500 mils length USMZ50D-05-070500-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 5 70 500 USMZ50D-05-070500-WP -WP 16 $50.37 USMZ50D-05-070500 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50D-05-070500-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.usmicrowaves.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission.
|
