USMZ50QT-05-040250 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040250,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QT-05-040250 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040250,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QT-05-040200 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 200 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040200,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QT-05-040150 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 150 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040150,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QT-05-040100 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 100 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040100,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QT-05-040050 - Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 50 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 5 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves USMZ50QT-05-040050,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit US MICROWAVES Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 50 mils length Advanced Microwave Components USMZ50QT-05-040050 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 50 mils length USMZ50QT-05-040050-WP USMZ50QT-05-040050 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50QT-05-040050 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QT-05-040050 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 12 mils Width 40 mils Length 50 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50QT-05-040050 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 5 50x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 50 mils length USMZ50QT-05-040050-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QT-05-040050 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 50 mils length USMZ50QT-05-040050-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 40 50 USMZ50QT-05-040050-WP -WP 193 $ USMZ50QT-05-040050 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. USMZ50QT-05-040050-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 100 mils length Advanced Microwave Components USMZ50QT-05-040100 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 100 mils length USMZ50QT-05-040100-WP USMZ50QT-05-040100 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50QT-05-040100 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QT-05-040100 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 12 mils Width 40 mils Length 100 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50QT-05-040100 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 5 100x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 100 mils length USMZ50QT-05-040100-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QT-05-040100 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 100 mils length USMZ50QT-05-040100-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 40 100 USMZ50QT-05-040100-WP -WP 125 $ USMZ50QT-05-040100 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. USMZ50QT-05-040100-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 150 mils length Advanced Microwave Components USMZ50QT-05-040150 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 150 mils length USMZ50QT-05-040150-WP USMZ50QT-05-040150 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50QT-05-040150 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QT-05-040150 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 12 mils Width 40 mils Length 150 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50QT-05-040150 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 5 150x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 150 mils length USMZ50QT-05-040150-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QT-05-040150 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 150 mils length USMZ50QT-05-040150-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 40 150 USMZ50QT-05-040150-WP -WP 91 $ USMZ50QT-05-040150 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. USMZ50QT-05-040150-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 200 mils length Advanced Microwave Components USMZ50QT-05-040200 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 200 mils length USMZ50QT-05-040200-WP USMZ50QT-05-040200 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50QT-05-040200 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QT-05-040200 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 12 mils Width 40 mils Length 200 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50QT-05-040200 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 5 200x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 200 mils length USMZ50QT-05-040200-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QT-05-040200 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 200 mils length USMZ50QT-05-040200-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 40 200 USMZ50QT-05-040200-WP -WP 73 $ USMZ50QT-05-040200 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. USMZ50QT-05-040200-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length Advanced Microwave Components USMZ50QT-05-040250 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy. USMZ50QT-05-040250 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 12 mils Width 40 mils Length 250 mils Thickness 5 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 5 250x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 5 40 250 USMZ50QT-05-040250-WP -WP 61 $ USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. USMZ50QT-05-040250-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.

 
 
US MICROWAVES   Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length
Advanced Microwave Components   USMZ50QT-05-040250
 
 

FEATURES
APPLICATIONS
50Ω MICROSTRIP TRANSMISSION LINE
Low insertion loss
High reliability and ruggedness
Available in different quartz thickness and overall sizes.
Engineering Lab Kits available
Custom Z50 sizes available upon request.
Most MicroStrip microwave applications use 50 ohm transmission lines as basic building block.
 Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP

USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material, air.
The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy.
USMZ50QT-05-040250 USM Z50QT-05-040XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES
ELECTRICAL/MECHANICAL CHARACTERISTICS
PARAMETER VALUE UNITS
Impedance 50 Ω
Transmission Line width W0 12 mils
Width 40 mils
Length 250 mils
Thickness 5 mils
Operating Temperature Range -55 to +125 °C
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES
GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal
SiO2
Quartz		 5 250x40±2 Standard 3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders.
layout for Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP
All US Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES
RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH
Z50Q 50Ohms transmission lines, 5 mils thick quartz, 40 mils width, 250 mils length USMZ50QT-05-040250-WP
CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT

50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION

50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST
THICKNESS
[mils]		 WIDTH
[mils]		 LENGTH
[mils]		 US MICROWAVES
PART NUMBER		 WAFFLE
PACKS		 MINIM ORDER
QTY		 U/P
[$]
5 40 250 USMZ50QT-05-040250-WP -WP 61 $
USMZ50QT-05-040250 50Ω MICROSTRIP TRANSMISSION LINES: List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

USMZ50QT-05-040250-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.

Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

Last updated: July 06, 2009
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2024 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.