|
USMZ50QTT-10-105150 - Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 150 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 10 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50QTT-10-105150,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit
USMZ50QTT-10-105150 - Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 150 mils length -
Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 10 mils Al2O3 alumina
ceramic substrate manufactured by US Microwaves USMZ50QTT-10-105150,50 ohm impedance microstrip transmission lines,50
ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm
transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QTT-10-105100 - Z50Q 50Ohms
transmission lines, 10 mils thick quartz, 105 mils width, 100 mils length - Low return loss optimised up to 50GHz, Z50
50 ohm impedance microstrip transmission lines on 10 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50QTT-10-105100,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip
transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission
line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid
circuit USMZ50QTT-10-105050 - Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 50 mils length -
Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 10 mils Al2O3 alumina
ceramic substrate manufactured by US Microwaves USMZ50QTT-10-105050,50 ohm impedance microstrip transmission lines,50
ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm
transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit US MICROWAVES Z50Q 50Ohms transmission
lines, 10 mils thick quartz, 105 mils width, 50 mils length Advanced Microwave Components USMZ50QTT-10-105050 FEATURES
APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different
quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most
MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission
lines, 10 mils thick quartz, 105 mils width, 50 mils length USMZ50QTT-10-105050-WP USMZ50QTT-10-105050 50Ω MICROSTRIP
TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in
the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin
conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in
turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the
conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that
it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the
top side, component mounting is relatively easy. USMZ50QTT-10-105050 USM Z50QTT-10-105XXX 50 ohm MicroStrip
transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms
transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QTT-10-105050
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 24 mils Width 105 mils Length 50 mils Thickness 10 mils Operating Temperature Range -55 to
+125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum
ratings may cause permanent damage to the device. USMZ50QTT-10-105050 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE
INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 10 50x105±2 Standard
3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au
compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout
for Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 50 mils length USMZ50QTT-10-105050-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50QTT-10-105050 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 50 mils length USMZ50QTT-10-105050-WP
CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD
PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH
[mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 10 105 50 USMZ50QTT-10-105050-WP
-WP 127 $ USMZ50QTT-10-105050 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical
applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be
established on a case by case basis. For any special applications, die level KGD qualification requirements, different
packaging or custom configurations, contact sales department. USMZ50QTT-10-105050-WP 50Ω MICROSTRIP TRANSMISSION LINES
INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line
HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line.
On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before,
becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products
packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks
ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip
transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs
(WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high
volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked
and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for
customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY!
US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products
provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate
as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights
of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its
product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within
support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space
equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home
Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No
material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 10
mils thick quartz, 105 mils width, 100 mils length Advanced Microwave Components USMZ50QTT-10-105100 FEATURES
APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different
quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most
MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission
lines, 10 mils thick quartz, 105 mils width, 100 mils length USMZ50QTT-10-105100-WP USMZ50QTT-10-105100 50Ω MICROSTRIP
TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in
the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin
conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in
turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the
conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that
it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the
top side, component mounting is relatively easy. USMZ50QTT-10-105100 USM Z50QTT-10-105XXX 50 ohm MicroStrip
transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms
transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QTT-10-105100
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 24 mils Width 105 mils Length 100 mils Thickness 10 mils Operating Temperature Range -55 to
+125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum
ratings may cause permanent damage to the device. USMZ50QTT-10-105100 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE
INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 10 100x105±2 Standard
3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au
compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout
for Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 100 mils length USMZ50QTT-10-105100-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50QTT-10-105100 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 100 mils length USMZ50QTT-10-105100-WP
CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD
PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH
[mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 10 105 100 USMZ50QTT-10-105100-WP
-WP 79 $ USMZ50QTT-10-105100 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical
applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be
established on a case by case basis. For any special applications, die level KGD qualification requirements, different
packaging or custom configurations, contact sales department. USMZ50QTT-10-105100-WP 50Ω MICROSTRIP TRANSMISSION LINES
INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line
HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line.
On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before,
becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products
packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks
ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip
transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs
(WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high
volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked
and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for
customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY!
US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products
provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate
as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights
of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its
product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within
support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space
equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home
Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No
material from this site may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 10
mils thick quartz, 105 mils width, 150 mils length Advanced Microwave Components USMZ50QTT-10-105150 FEATURES
APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different
quartz thickness and overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most
MicroStrip microwave applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission
lines, 10 mils thick quartz, 105 mils width, 150 mils length USMZ50QTT-10-105150-WP USMZ50QTT-10-105150 50Ω MICROSTRIP
TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in
the microwave integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin
conducting metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in
turn placed on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the
conducting strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that
it is well suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the
top side, component mounting is relatively easy. USMZ50QTT-10-105150 USM Z50QTT-10-105XXX 50 ohm MicroStrip
transmission lines are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms
transmission lines are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY
DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced
semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold
interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability.
Thin film technology is the preferred solution for all applications that require low noise, long term stability and
excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition
of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are
available in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QTT-10-105150
50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω
Transmission Line width W0 24 mils Width 105 mils Length 150 mils Thickness 10 mils Operating Temperature Range -55 to
+125 °C ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum
ratings may cause permanent damage to the device. USMZ50QTT-10-105150 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE
INFORMATION Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 10 150x105±2 Standard
3µm thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au
compatible with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout
for Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 150 mils length USMZ50QTT-10-105150-WP All US
Microwaves 50Ω microstrip transmission lines products are available in die form. Typical delivery for die products is
2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is
periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in
waffle packs (WP). USMZ50QTT-10-105150 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE
LENGTH Z50Q 50Ohms transmission lines, 10 mils thick quartz, 105 mils width, 150 mils length USMZ50QTT-10-105150-WP
CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD
PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH
[mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 10 105 150 USMZ50QTT-10-105150-WP
-WP 57 $ USMZ50QTT-10-105150 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical
applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be
established on a case by case basis. For any special applications, die level KGD qualification requirements, different
packaging or custom configurations, contact sales department. USMZ50QTT-10-105150-WP 50Ω MICROSTRIP TRANSMISSION LINES
INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line
HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line.
On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before,
becoming non cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products
packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks
ARO. Certain items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip
transmission lines devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs
(WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high
volume automated assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked
and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for
customers that have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY!
US Microwaves guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products
provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate
as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights
of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its
product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within
support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space
equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home
Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No
material from this site may be used or reproduced without permission.
|
