|
USMZ50QTT-15-080200 - Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 200 mils length - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50QTT-15-080200,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit
USMZ50QTT-15-080200 - Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 200 mils length -
Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina
ceramic substrate manufactured by US Microwaves USMZ50QTT-15-080200,50 ohm impedance microstrip transmission lines,50
ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm
transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QTT-15-080150 - Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 150 mils length - Low return loss optimised up to 50GHz, Z50
50 ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50QTT-15-080150,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip
transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission
line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid
circuit USMZ50QTT-15-080100 - Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 100 mils length -
Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina
ceramic substrate manufactured by US Microwaves USMZ50QTT-15-080100,50 ohm impedance microstrip transmission lines,50
ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm
transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit USMZ50QTT-15-080050 - Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 50 mils length - Low return loss optimised up to 50GHz, Z50 50
ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
USMZ50QTT-15-080050,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip
transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission
line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid
circuit US MICROWAVES Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 50 mils length Advanced
Microwave Components USMZ50QTT-15-080050 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion loss High
reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits available
Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines as basic
building block. Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 50 mils length
USMZ50QTT-15-080050-WP USMZ50QTT-15-080050 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION
NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to
monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and
length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The
substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material,
air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB)
fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy.
USMZ50QTT-15-080050 USM Z50QTT-15-080XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be
used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz
thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin
film microwave products are manufactured using advanced semiconductors and thin film technologies including
ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS
capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution
for all applications that require low noise, long term stability and excellent performance at very high frequencies. US
Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet
resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high
reliability hybrid and multi chip module applications. USMZ50QTT-15-080050 50Ω MICROSTRIP TRANSMISSION LINES
ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 36.4 mils Width
80 mils Length 50 mils Thickness 15 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment
and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the
device. USMZ50QTT-15-080050 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size
LxW [mils] Top Conductor Backside metal SiO2 Quartz 15 50x80±2 Standard 3µm thick, 99.99% electroplated gold with a TiW
barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive epoxy.
Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 15 mils thick quartz,
80 mils width, 50 mils length USMZ50QTT-15-080050-WP All US Microwaves 50Ω microstrip transmission lines products are
available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks
ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire
applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QTT-15-080050 50Ω MICROSTRIP
TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 15 mils thick
quartz, 80 mils width, 50 mils length USMZ50QTT-15-080050-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW
SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP TRANSMISSION
LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS
MINIM ORDER QTY U/P [$] 15 80 50 USMZ50QTT-15-080050-WP -WP 127 $ USMZ50QTT-15-080050 50Ω MICROSTRIP TRANSMISSION
LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification
are subject to minimum order levels to be established on a case by case basis. For any special applications, die level
KGD qualification requirements, different packaging or custom configurations, contact sales department.
USMZ50QTT-15-080050-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: 50Ω
Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order confirmation receipt
is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US
Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery
for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO. For 50Ω Microstrip
transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery
up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire applications are 100%
tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film
frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip transmission lines
devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF). SAMPLES: Samples of 50Ω
Microstrip transmission lines are available only for customers that have issued firm orders pending qualification of
product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of
all 50Ω Microstrip transmission lines standard products provided minimum order quantities are met. U.S. Microwaves has
made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S.
Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S.
Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves
products are not authorized for and should not be used within support systems which are intended for surgical implants
into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications
without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory
Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026
Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site may be used or reproduced
without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 100 mils length
Advanced Microwave Components USMZ50QTT-15-080100 FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion
loss High reliability and ruggedness Available in different quartz thickness and overall sizes. Engineering Lab Kits
available Custom Z50 sizes available upon request. Most MicroStrip microwave applications use 50 ohm transmission lines
as basic building block. Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80 mils width, 100 mils length
USMZ50QTT-15-080100-WP USMZ50QTT-15-080100 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION
NOTE 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to
monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and
length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The
substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material,
air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB)
fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy.
USMZ50QTT-15-080100 USM Z50QTT-15-080XXX 50 ohm MicroStrip transmission lines are basic building blocks designed to be
used in chip and wire microwave hybrid circuits. 50 ohms transmission lines are available in different SiO2 quartz
thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin
film microwave products are manufactured using advanced semiconductors and thin film technologies including
ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS
capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution
for all applications that require low noise, long term stability and excellent performance at very high frequencies. US
Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet
resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high
reliability hybrid and multi chip module applications. USMZ50QTT-15-080100 50Ω MICROSTRIP TRANSMISSION LINES
ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 36.4 mils Width
80 mils Length 100 mils Thickness 15 mils Operating Temperature Range -55 to +125 °C ONLY Proper die handling equipment
and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the
device. USMZ50QTT-15-080100 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION Substrate Thickness [mils] Size
LxW [mils] Top Conductor Backside metal SiO2 Quartz 15 100x80±2 Standard 3µm thick, 99.99% electroplated gold with a
TiW barrier Backside of the die is metallized with standard TiW/Au compatible with Au-Ge or silver filled conductive
epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms transmission lines, 15 mils thick
quartz, 80 mils width, 100 mils length USMZ50QTT-15-080100-WP All US Microwaves 50Ω microstrip transmission lines
products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is
3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and
wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). USMZ50QTT-15-080100 50Ω
MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms transmission lines, 15
mils thick quartz, 80 mils width, 100 mils length USMZ50QTT-15-080100-WP CLICK TO ENLARGE S-PARAMETERS CARTESIAN PLOT
CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING INFORMATION 50Ω MICROSTRIP
TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils] US MICROWAVES PART NUMBER
WAFFLE PACKS MINIM ORDER QTY U/P [$] 15 80 100 USMZ50QTT-15-080100-WP -WP 79 $ USMZ50QTT-15-080100 50Ω MICROSTRIP
TRANSMISSION LINES: Products sold for space, military or medical applications, element evaluation and/or level K or S
qualification are subject to minimum order levels to be established on a case by case basis. For any special
applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales
department. USMZ50QTT-15-080100-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US Microwaves P/N Quantity E-mail
ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the order along with an order
confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted
and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs is 2-4 weeks ARO.
For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be available from
stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for chip and wire
applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can
be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω Microstrip
transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm orders
pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees continuous
supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order quantities
are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no
responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which
may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without
prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are
intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or
nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support
PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site
may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80
mils width, 150 mils length Advanced Microwave Components USMZ50QTT-15-080150 FEATURES APPLICATIONS 50Ω MICROSTRIP
TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and
overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave
applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 15 mils thick
quartz, 80 mils width, 150 mils length USMZ50QTT-15-080150-WP USMZ50QTT-15-080150 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50QTT-15-080150 USM Z50QTT-15-080XXX 50 ohm MicroStrip transmission lines
are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines
are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QTT-15-080150 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 36.4 mils Width 80 mils Length 150 mils Thickness 15 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50QTT-15-080150 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 15 150x80±2 Standard 3µm thick,
99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with
Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 150 mils length USMZ50QTT-15-080150-WP All US Microwaves 50Ω
microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO.
For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically
updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).
USMZ50QTT-15-080150 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 150 mils length USMZ50QTT-15-080150-WP CLICK TO ENLARGE
S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING
INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils]
US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 15 80 150 USMZ50QTT-15-080150-WP -WP 57 $
USMZ50QTT-15-080150 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications,
element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by
case basis. For any special applications, die level KGD qualification requirements, different packaging or custom
configurations, contact sales department. USMZ50QTT-15-080150-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US
Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the
order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have
to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable
binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs
is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be
available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for
chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k
pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω
Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame
(FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm
orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees
continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order
quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no
responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which
may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without
prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are
intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or
nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support
PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site
may be used or reproduced without permission. US MICROWAVES Z50Q 50Ohms transmission lines, 15 mils thick quartz, 80
mils width, 200 mils length Advanced Microwave Components USMZ50QTT-15-080200 FEATURES APPLICATIONS 50Ω MICROSTRIP
TRANSMISSION LINE Low insertion loss High reliability and ruggedness Available in different quartz thickness and
overall sizes. Engineering Lab Kits available Custom Z50 sizes available upon request. Most MicroStrip microwave
applications use 50 ohm transmission lines as basic building block. Z50Q 50Ohms transmission lines, 15 mils thick
quartz, 80 mils width, 200 mils length USMZ50QTT-15-080200-WP USMZ50QTT-15-080200 50Ω MICROSTRIP TRANSMISSION LINES
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE 50Ω Microstrip transmission lines are widely used in the microwave
integrated circuits from hybrids to monolithics. The microstrip transmission line is composed of a thin conducting
metal strip of width Wo, thickness T and length L placed on a nonmagnetic dielectric substrate that is in turn placed
on a conducting metal ground-plane. The substrate has thickness T and relative permittivity εr. Above the conducting
strip is a second dielectric material, air. The advantages of using the microstrip transmission line is that it is well
suited for the printed circuit (PCB) fabrication process, and because the strip conductor is exposed on the top side,
component mounting is relatively easy. USMZ50QTT-15-080200 USM Z50QTT-15-080XXX 50 ohm MicroStrip transmission lines
are basic building blocks designed to be used in chip and wire microwave hybrid circuits. 50 ohms transmission lines
are available in different SiO2 quartz thicknesses and different widths and lengths. TECHNOLOGY DESCRIPTION:
SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film microwave products are manufactured using advanced semiconductors
and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect
metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film
technology is the preferred solution for all applications that require low noise, long term stability and excellent
performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide
range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available
in die form and are ideal for high reliability hybrid and multi chip module applications. USMZ50QTT-15-080200 50Ω
MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS PARAMETER VALUE UNITS Impedance 50 Ω Transmission
Line width W0 36.4 mils Width 80 mils Length 200 mils Thickness 15 mils Operating Temperature Range -55 to +125 °C ONLY
Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may
cause permanent damage to the device. USMZ50QTT-15-080200 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size LxW [mils] Top Conductor Backside metal SiO2 Quartz 15 200x80±2 Standard 3µm thick,
99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible with
Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 200 mils length USMZ50QTT-15-080200-WP All US Microwaves 50Ω
microstrip transmission lines products are available in die form. Typical delivery for die products is 2-3 weeks ARO.
For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically
updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).
USMZ50QTT-15-080200 50Ω MICROSTRIP TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50Q 50Ohms
transmission lines, 15 mils thick quartz, 80 mils width, 200 mils length USMZ50QTT-15-080200-WP CLICK TO ENLARGE
S-PARAMETERS CARTESIAN PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS ORDERING
INFORMATION 50Ω MICROSTRIP TRANSMISSION LINES STANDARD PRODUCTS PRICE LIST THICKNESS [mils] WIDTH [mils] LENGTH [mils]
US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] 15 80 200 USMZ50QTT-15-080200-WP -WP 45 $
USMZ50QTT-15-080200 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications,
element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by
case basis. For any special applications, die level KGD qualification requirements, different packaging or custom
configurations, contact sales department. USMZ50QTT-15-080200-WP 50Ω MICROSTRIP TRANSMISSION LINES INSTANT QUOTE US
Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines may be ordered on line HERE. A copy of the
order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have
to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable
binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in waffle packs
is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain items may be
available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines devices for
chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k
pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, 50Ω
Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame
(FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that have issued firm
orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves guarantees
continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided minimum order
quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no
responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which
may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without
prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are
intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or
nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support
PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No material from this site
may be used or reproduced without permission.
|
