|
Z50C-15-105-Kit - Z50 50Ω Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, variable length, no gold pile up - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on 15 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves
Z50C-15-105-Kit,50 ohm impedance microstrip transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit
Z50C-15-105-Kit - Z50 50Ω Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, variable
length, no gold pile up - Low return loss optimised up to 50GHz, Z50 50 ohm impedance microstrip transmission lines on
15 mils Al2O3 alumina ceramic substrate manufactured by US Microwaves Z50C-15-105-Kit,50 ohm impedance microstrip
transmission lines,50 ohm microstrip transmission lines,microstrip transmission lines,transmission lines,50 ohm
microstrip,50 ohm transmission line,50 ohm lines,microstrip,transission line,S parameters,Low return loss,50 ohm
impedance,alumina,ceramic,microwave,system on chip,chip and wire,hybrid circuit US MICROWAVES Z50 50Ω Microstrip
transmission lines, 15 mils thick ceramic, 105 mils width, variable length, no gold pile up Advanced Microwave
Components USM Z50C-15-105-Kit ENGINEERING LAB KIT FEATURES APPLICATIONS 50Ω MICROSTRIP TRANSMISSION LINE Low insertion
loss High reliability and ruggedness Available in different ceramic thickness and overall sizes. Engineering Lab Kits
available Custom Z50 sizes available upon request. Terminated within <2mils from edge of ceramic to avoid gold pile up
caused by dicing opperation. Most microwave applications use 50 ohm microstrip transmission lines as basic building
block. Z50 50Ω Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, variable length, no gold pile up
Z50C-15-105-Kit Z50C-15-105-Kit 50Ω MICROSTRIP TRANSMISSION LINES PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE US
Microwaves offers a standard lab kit for the 50 ohms transmission lines. The kit contains all six different sizes in
quantities listed in price list table located on bottom of this page. The U/P for each kit of 6 different sizes starts
from $250.00. No RFQ i.e. request for quote is necessary. Registered Customers may place orders using "Order" link or
by Fax:(408)986-8027. For other inquiries, please e-mail using Contacts page, or contact US Microwaves technical sales
at 408-986-8026. 50Ω Microstrip transmission lines are widely used in the microwave integrated circuits from hybrids to
monolithics. The microstrip transmission line is composed of a thin conducting metal strip of width Wo, thickness T and
length L placed on a nonmagnetic dielectric substrate that is in turn placed on a conducting metal ground-plane. The
substrate has thickness T and relative permittivity εr. Above the conducting strip is a second dielectric material,
air. The advantages of using the microstrip transmission line is that it is well suited for the printed circuit (PCB)
fabrication process, and because the strip conductor is exposed on the top side, component mounting is relatively easy.
USM Z50C-15-105-Kit 50 ohm microstrip transmission lines are basic building blocks designed to be used in chip and wire
microwave hybrid circuits. 50 ohms microstrip transmission lines are available in different alumina ceramic thicknesses
and different widths and lengths. 50 ohm microstrip transmission lines offer the designer complete flexibility and
repeatability for the most challenging RF and microwave applications. Transmission lines in Z50C-15-105-Kit series are
terminated within <2 mils from edge of ceramic to avoid gold pile up caused by dicing operation. Gold pile up may
interfire with wire bonding in some applications. Z50C-15-105-Kit series of 50Ω transmission lines is also available in
custom sized at no additional cost. TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING All thin film
microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and
self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve
excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications
that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs
proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from
1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and
multi chip module applications. Z50C-15-105-Kit 50Ω MICROSTRIP TRANSMISSION LINES ELECTRICAL/MECHANICAL CHARACTERISTICS
PARAMETER VALUE UNITS Impedance 50 Ω Transmission Line width W0 14.4 mils Operating Temperature Range -55 to +125 °C
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings
may cause permanent damage to the device. Z50C-15-105-Kit 50Ω MICROSTRIP TRANSMISSION LINES GENERAL DIE INFORMATION
Substrate Thickness [mils] Size [mils] Top Conductor Backside metal Al2O3 Aluminum Oxide 15±0.5 LLx105±2 Standard 3µm
thick, 99.99% electroplated gold with a TiW barrier Backside of the die is metallized with standard TiW/Au compatible
with Au-Ge or silver filled conductive epoxy. Custom metallization is available for special orders. layout for Z50
50Ohms Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, 50 mils length, no gold pile up
USMZ50C-15-105050-WP layout for Z50 50Ohms Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, 100
mils length, no gold pile up USMZ50C-15-105100-WP layout for Z50 50Ohms Microstrip transmission lines, 15 mils thick
ceramic, 105 mils width, 150 mils length, no gold pile up USMZ50C-15-105150-WP layout for Z50 50Ohms Microstrip
transmission lines, 15 mils thick ceramic, 105 mils width, 200 mils length, no gold pile up USMZ50C-15-105200-WP layout
for Z50 50Ohms Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, 250 mils length, no gold pile up
USMZ50C-15-105250-WP layout for Z50 50Ohms Microstrip transmission lines, 15 mils thick ceramic, 105 mils width, 500
mils length, no gold pile up USMZ50C-15-105500-WP All US Microwaves 50Ω microstrip transmission lines products are
available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks
ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire
applications are 100% tested, visual inspected and shipped in waffle packs (WP). Z50C-15-105-Kit 50Ω MICROSTRIP
TRANSMISSION LINES RETURN LOSS S-PARAMETERS FOR DIFFERENT LINE LENGTH Z50 50Ω Microstrip transmission lines, 15 mils
thick ceramic, 105 mils width, variable length, no gold pile up Z50C-15-105-Kit CLICK TO ENLARGE S-PARAMETERS CARTESIAN
PLOT CLICK TO VIEW SMITH CHART PLOT 50Ω MICROSTRIP TRANSMISSION LINES LAB KIT ORDERING INFORMATION 50Ω MICROSTRIP
TRANSMISSION LINES LAB KIT CONTENT AND PRICING WIDTH [mils] LENGTH [mils] PART NUMBER IN KIT WAFFLE PACKS QTY U/P [$]
Lab Kit Total $375.00 50Ω MICROSTRIP TRANSMISSION LINES: Products sold for space, military or medical applications,
element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by
case basis. For any special applications, die level KGD qualification requirements, different packaging or custom
configurations, contact sales department. Z50C-15-105-Kit 50Ω MICROSTRIP TRANSMISSION LINES LAB KIT INSTANT QUOTE US
Microwaves P/N Quantity E-mail ORDERING: 50Ω Microstrip transmission lines Lab Kits may be ordered on line HERE. A copy
of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders
have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non
cancelable binding contracts. DELIVERY: Typical delivery for 50Ω Microstrip transmission lines products packaged in
waffle packs is 2-4 weeks ARO. For 50Ω Microstrip transmission lines Custom designs, delivery is 3-5 weeks ARO. Certain
items may be available from stock with delivery up to 1 week. SHIPPING/PACKAGING: All 50Ω Microstrip transmission lines
devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger
orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated
assembly, 50Ω Microstrip transmission lines devices may be supplied as 4" wafers 100% tested, inked and diced on
expanded film frame (FF). SAMPLES: Samples of 50Ω Microstrip transmission lines are available only for customers that
have issued firm orders pending qualification of product in a particular application. GUARANTEED SUPPLY! US Microwaves
guarantees continuous supply and availability of all 50Ω Microstrip transmission lines standard products provided
minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as
possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of
third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its
product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within
support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space
equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home
Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales Last updated: US MICROWAVES www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 ©1990- US MICROWAVES All rights reserved. No
material from this site may be used or reproduced without permission.
|
