HSKBEOI05xxxyyy Beryllium Oxide thermal management, therma plane, Laser diode submounts BeO - 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks - High heat transfer rate, High thermal conductivity Beryllium Oxide heat sinks and stand offs manufactured by US Microwaves HSKBEOI05xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers HSKBEOI05xxxyyy Beryllium Oxide thermal management, therma plane, Laser diode submounts BeO - 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks - High heat transfer rate, High thermal conductivity Beryllium Oxide heat sinks and stand offs manufactured by US Microwaves HSKBEOI05xxxyyy,thermal management,therma plane,Laser diode submounts,Heat sinks, stand offs, bonding islands, isolated, electrically conductive,aluminum nitride, beryllium oxide,silicon, copper,heat transfer rate,thermal conductivity,thermal contact,thermal resistance,thermal shock,microwave hybrid circuits,GaAs microwave active devices,solid state power amplifiers US MICROWAVES 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks Advanced Microwave Components HSKBEOI05xxxyyy FEATURES APPLICATIONS BeO Isolated Heat Sink High heat transfer rate High thermal conductivity Very good thermal contact Very good thermal shock resistance Microwave hybrid circuits Mount for GaAs microwave active devices Solid state RF power amplifiers 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks HSKBEOI05xxxyyy HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE The HSKBEOI05xxxyyy series of microwave 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink ELECTRICAL/MECHANICAL CHARACTERISTICS LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS - - Thickness T 5 mils 10 10 Thermal Resistance Rth 7.03 K/W Thermal Conductivity k 1.42E-01 W/K Capacitance C 0.03 pF 20 10 Thermal Resistance Rth 3.52 K/W Thermal Conductivity k 2.84E-01 W/K Capacitance C 0.06 pF 30 10 Thermal Resistance Rth 2.34 K/W Thermal Conductivity k 4.27E-01 W/K Capacitance C 0.09 pF 20 20 Thermal Resistance Rth 1.76 K/W Thermal Conductivity k 5.68E-01 W/K Capacitance C 0.121 pF 40 20 Thermal Resistance Rth 0.88 K/W Thermal Conductivity k 1.14E+00 W/K Capacitance C 0.241 pF 60 20 Thermal Resistance Rth 0.59 K/W Thermal Conductivity k 1.69E+00 W/K Capacitance C 0.362 pF 30 30 Thermal Resistance Rth 0.78 K/W Thermal Conductivity k 1.28E+00 W/K Capacitance C 0.271 pF 60 30 Thermal Resistance Rth 0.39 K/W Thermal Conductivity k 2.56E+00 W/K Capacitance C 0.542 pF 120 30 Thermal Resistance Rth 0.2 K/W Thermal Conductivity k 5.00E+00 W/K Capacitance C 1.085 pF 40 40 Thermal Resistance Rth 0.44 K/W Thermal Conductivity k 2.27E+00 W/K Capacitance C 0.482 pF 80 40 Thermal Resistance Rth 0.22 K/W Thermal Conductivity k 4.55E+00 W/K Capacitance C 0.964 pF 120 40 Thermal Resistance Rth 0.15 K/W Thermal Conductivity k 6.67E+00 W/K Capacitance C 1.447 pF 160 40 Thermal Resistance Rth 0.11 K/W Thermal Conductivity k 9.09E+00 W/K Capacitance C 1.929 pF 50 50 Thermal Resistance Rth 0.28 K/W Thermal Conductivity k 3.57E+00 W/K Capacitance C 0.753 pF 80 50 Thermal Resistance Rth 0.18 K/W Thermal Conductivity k 5.56E+00 W/K Capacitance C 1.205 pF 100 50 Thermal Resistance Rth 0.14 K/W Thermal Conductivity k 7.14E+00 W/K Capacitance C 1.507 pF 120 60 Thermal Resistance Rth 0.1 K/W Thermal Conductivity k 1.00E+01 W/K Capacitance C 2.17 pF 200 100 Thermal Resistance Rth 0.04 K/W Thermal Conductivity k 2.50E+01 W/K Capacitance C 6.027 pF 180 120 Thermal Resistance Rth 0.03 K/W Thermal Conductivity k 3.33E+01 W/K Capacitance C 6.509 pF 240 120 Thermal Resistance Rth 0.02 K/W Thermal Conductivity k 5.00E+01 W/K Capacitance C 8.679 pF 250 120 Thermal Resistance Rth 0.02 K/W Thermal Conductivity k 5.00E+01 W/K Capacitance C 9.041 pF 290 170 Thermal Resistance Rth 0.01 K/W Thermal Conductivity k 1.00E+02 W/K Capacitance C 14.857 pF 230 180 Thermal Resistance Rth 0.02 K/W Thermal Conductivity k 5.00E+01 W/K Capacitance C 12.476 pF 220 250 Thermal Resistance Rth 0.01 K/W Thermal Conductivity k 1.00E+02 W/K Capacitance C 16.575 pF 250 250 Thermal Resistance Rth 0.01 K/W Thermal Conductivity k 1.00E+02 W/K Capacitance C 18.835 pF 370 250 Thermal Resistance Rth 0.01 K/W Thermal Conductivity k 1.00E+02 W/K Capacitance C 27.876 pF ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink GENERAL DIE INFORMATION Substrate Thickness [mils] Size [mils] Case style BeO [Beryllium Oxide] 5±0.5 xxxxyyy±2 Frontside metal Backside metal The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. L x W mils, 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks HSKBEOI05xxxyyy All US Microwaves Beryllium Oxide Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). Beryllium Oxide Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION 5 mils Beryllium Oxide Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au] LENGTH [mils] WIDTH [mils] US MICROWAVES PART NUMBER WAFFLE PACKS MINIM ORDER QTY U/P [$] ORDER RFQ 10 10 HSKBEOI05010010-BD0 -WP 1205 $1.328 ORDER 20 10 HSKBEOI05020010-BD0 -WP 1100 $1.455 ORDER 30 10 HSKBEOI05030010-BD0 -WP 1015 $1.576 ORDER 20 20 HSKBEOI05020020-BD0 -WP 980 $1.633 ORDER 40 20 HSKBEOI05040020-BD0 -WP 805 $1.988 ORDER 60 20 HSKBEOI05060020-BD0 -WP 685 $2.336 ORDER 30 30 HSKBEOI05030030-BD0 -WP 785 $2.038 ORDER 60 30 HSKBEOI05060030-BD0 -WP 590 $2.712 ORDER 120 30 HSKBEOI05120030-BD0 -WP 395 $4.051 ORDER 40 40 HSKBEOI05040040-BD0 -WP 630 $2.540 ORDER 80 40 HSKBEOI05080040-BD0 -WP 440 $3.636 ORDER 120 40 HSKBEOI05120040-BD0 -WP 335 $4.776 ORDER 160 40 HSKBEOI05160040-BD0 -WP 275 $5.818 ORDER 50 50 HSKBEOI05050050-BD0 -WP RFQ 80 50 HSKBEOI05080050-BD0 -WP RFQ 100 50 HSKBEOI05100050-BD0 -WP RFQ 120 60 HSKBEOI05120060-BD0 -WP RFQ 200 100 HSKBEOI05200100-BD0 -WP RFQ 180 120 HSKBEOI05180120-BD0 -WP RFQ 240 120 HSKBEOI05240120-BD0 -WP RFQ 250 120 HSKBEOI05250120-BD0 -WP RFQ 290 170 HSKBEOI05290170-BD0 -WP RFQ 230 180 HSKBEOI05230180-BD0 -WP RFQ 220 250 HSKBEOI05220250-BD0 -WP RFQ 250 250 HSKBEOI05250250-BD0 -WP RFQ 370 250 HSKBEOI05370250-BD0 -WP RFQ HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink: Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department. HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink INSTANT QUOTE US Microwaves P/N Quantity E-mail ORDERING: Beryllium Oxide Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts. DELIVERY: Typical delivery for 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks BeO SHIPPING/PACKAGING: All 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks SAMPLES: Samples of 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks standard products provided minimum order quantities are met. U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves. Home Product Tree Tech. Support PDF Request Quote Inventory Place Order Contact sales

 
 
US MICROWAVES   5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks
Advanced Microwave Components   HSKBEOI05xxxyyy
 
 

FEATURES
APPLICATIONS
BeO Isolated Heat Sink
High heat transfer rate
High thermal conductivity
Very good thermal contact
Very good thermal shock resistance
Microwave hybrid circuits
Mount for GaAs microwave active devices
Solid state RF power amplifiers
5 mils thick gold coated thin film Beryllium Oxide Isolated  heat sinks HSKBEOI05xxxyyy

HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink
PRODUCT DESCRIPTION AND SHORT APPLICATION NOTE
The HSKBEOI05xxxyyy series of microwave 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks is designed to be used in microwave hybrid circuits. These devices can be used over the full military temperature range -55C to +125C. Quality and workmanship is per MIL-S-883. Level B. Devices are 100% visual inspected and packaged in waffle packs.

TECHNOLOGY DESCRIPTION: SEMICONDUCTOR - THIN FILM MANUFACTURING
All thin film microwave products are manufactured using advanced semiconductors and thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. US Microwaves employs proprietary thin film technologies for deposition of a wide range of resistive films with sheet resistance films from 1Ω/sq to 10,000Ω/sq. All US Microwaves products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink
ELECTRICAL/MECHANICAL CHARACTERISTICS
LENGTH [mils] WIDTH [mils] PARAMETER SYMBOL VALUE UNITS
- - Thickness T 5 mils
10 10 Thermal Resistance Rth 7.03 K/W
Thermal Conductivity k 1.42E-01 W/K
Capacitance C 0.03 pF
20 10 Thermal Resistance Rth 3.52 K/W
Thermal Conductivity k 2.84E-01 W/K
Capacitance C 0.06 pF
30 10 Thermal Resistance Rth 2.34 K/W
Thermal Conductivity k 4.27E-01 W/K
Capacitance C 0.09 pF
20 20 Thermal Resistance Rth 1.76 K/W
Thermal Conductivity k 5.68E-01 W/K
Capacitance C 0.121 pF
40 20 Thermal Resistance Rth 0.88 K/W
Thermal Conductivity k 1.14E+00 W/K
Capacitance C 0.241 pF
60 20 Thermal Resistance Rth 0.59 K/W
Thermal Conductivity k 1.69E+00 W/K
Capacitance C 0.362 pF
30 30 Thermal Resistance Rth 0.78 K/W
Thermal Conductivity k 1.28E+00 W/K
Capacitance C 0.271 pF
60 30 Thermal Resistance Rth 0.39 K/W
Thermal Conductivity k 2.56E+00 W/K
Capacitance C 0.542 pF
120 30 Thermal Resistance Rth 0.2 K/W
Thermal Conductivity k 5.00E+00 W/K
Capacitance C 1.085 pF
40 40 Thermal Resistance Rth 0.44 K/W
Thermal Conductivity k 2.27E+00 W/K
Capacitance C 0.482 pF
80 40 Thermal Resistance Rth 0.22 K/W
Thermal Conductivity k 4.55E+00 W/K
Capacitance C 0.964 pF
120 40 Thermal Resistance Rth 0.15 K/W
Thermal Conductivity k 6.67E+00 W/K
Capacitance C 1.447 pF
160 40 Thermal Resistance Rth 0.11 K/W
Thermal Conductivity k 9.09E+00 W/K
Capacitance C 1.929 pF
50 50 Thermal Resistance Rth 0.28 K/W
Thermal Conductivity k 3.57E+00 W/K
Capacitance C 0.753 pF
80 50 Thermal Resistance Rth 0.18 K/W
Thermal Conductivity k 5.56E+00 W/K
Capacitance C 1.205 pF
100 50 Thermal Resistance Rth 0.14 K/W
Thermal Conductivity k 7.14E+00 W/K
Capacitance C 1.507 pF
120 60 Thermal Resistance Rth 0.1 K/W
Thermal Conductivity k 1.00E+01 W/K
Capacitance C 2.17 pF
200 100 Thermal Resistance Rth 0.04 K/W
Thermal Conductivity k 2.50E+01 W/K
Capacitance C 6.027 pF
180 120 Thermal Resistance Rth 0.03 K/W
Thermal Conductivity k 3.33E+01 W/K
Capacitance C 6.509 pF
240 120 Thermal Resistance Rth 0.02 K/W
Thermal Conductivity k 5.00E+01 W/K
Capacitance C 8.679 pF
250 120 Thermal Resistance Rth 0.02 K/W
Thermal Conductivity k 5.00E+01 W/K
Capacitance C 9.041 pF
290 170 Thermal Resistance Rth 0.01 K/W
Thermal Conductivity k 1.00E+02 W/K
Capacitance C 14.857 pF
230 180 Thermal Resistance Rth 0.02 K/W
Thermal Conductivity k 5.00E+01 W/K
Capacitance C 12.476 pF
220 250 Thermal Resistance Rth 0.01 K/W
Thermal Conductivity k 1.00E+02 W/K
Capacitance C 16.575 pF
250 250 Thermal Resistance Rth 0.01 K/W
Thermal Conductivity k 1.00E+02 W/K
Capacitance C 18.835 pF
370 250 Thermal Resistance Rth 0.01 K/W
Thermal Conductivity k 1.00E+02 W/K
Capacitance C 27.876 pF
ONLY Proper die handling equipment and procedures should be employed. Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink
GENERAL DIE INFORMATION
Substrate Thickness [mils] Size [mils] Case style
BeO [Beryllium Oxide] 5±0.5 xxxxyyy±2  
Frontside metal Backside metal
The standard front side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders. The standard back side metallization (BD0 - compatible with AuSn,AuGe die attach) is min 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands >30 min at 400°C in air without loss of adhesion. Other available metallization schemes are -BD1: Ti/Pd/Au compatible with AuSn,AuGe -BD2: Ti/Pt/Au compatible with AuSn,AuGe -BD3: Ti/Ni/Au compatible with Soft Solder SAC -BD4: Ti/Pt/AuSn compatible with AuSn eutectic -BD5: Ti/Ni/Sn compatible with Soft Solder SAC. Custom metallization is available for special orders.
L x W mils, 5 mils thick gold coated thin film Beryllium Oxide Isolated  heat sinks HSKBEOI05xxxyyy
All US Microwaves Beryllium Oxide Isolated Heat Sink products are available in die form. Typical delivery for die products is 2-3 weeks ARO. For Custom designs, delivery is 3-4 weeks ARO. Certain items may be available from stock. Inventory is periodically updated. All devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP).

Beryllium Oxide Isolated Heat Sink STANDARD PRODUCTS ORDERING INFORMATION

5 mils Beryllium Oxide Isolated Heat Sink STANDARD PRODUCTS [BD0 TiW/Au]
LENGTH
[mils]
WIDTH
[mils]
US MICROWAVES
PART NUMBER
WAFFLE
PACKS
MINIM ORDER
QTY
U/P
[$]
ORDER
RFQ
10 10 HSKBEOI05010010-BD0 -WP 1205 $1.328 ORDER
20 10 HSKBEOI05020010-BD0 -WP 1100 $1.455 ORDER
30 10 HSKBEOI05030010-BD0 -WP 1015 $1.576 ORDER
20 20 HSKBEOI05020020-BD0 -WP 980 $1.633 ORDER
40 20 HSKBEOI05040020-BD0 -WP 805 $1.988 ORDER
60 20 HSKBEOI05060020-BD0 -WP 685 $2.336 ORDER
30 30 HSKBEOI05030030-BD0 -WP 785 $2.038 ORDER
60 30 HSKBEOI05060030-BD0 -WP 590 $2.712 ORDER
120 30 HSKBEOI05120030-BD0 -WP 395 $4.051 ORDER
40 40 HSKBEOI05040040-BD0 -WP 630 $2.540 ORDER
80 40 HSKBEOI05080040-BD0 -WP 440 $3.636 ORDER
120 40 HSKBEOI05120040-BD0 -WP 335 $4.776 ORDER
160 40 HSKBEOI05160040-BD0 -WP 275 $5.818 ORDER
50 50 HSKBEOI05050050-BD0 -WP     RFQ
80 50 HSKBEOI05080050-BD0 -WP     RFQ
100 50 HSKBEOI05100050-BD0 -WP     RFQ
120 60 HSKBEOI05120060-BD0 -WP     RFQ
200 100 HSKBEOI05200100-BD0 -WP     RFQ
180 120 HSKBEOI05180120-BD0 -WP     RFQ
240 120 HSKBEOI05240120-BD0 -WP     RFQ
250 120 HSKBEOI05250120-BD0 -WP     RFQ
290 170 HSKBEOI05290170-BD0 -WP     RFQ
230 180 HSKBEOI05230180-BD0 -WP     RFQ
220 250 HSKBEOI05220250-BD0 -WP     RFQ
250 250 HSKBEOI05250250-BD0 -WP     RFQ
370 250 HSKBEOI05370250-BD0 -WP     RFQ
HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink: List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting US Microwaves technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by US MICROWAVES at any time and without notice.
Products sold for space, military or medical applications, element evaluation and/or level K or S qualification are subject to minimum order levels to be established on a case by case basis. For any special applications, die level KGD qualification requirements, different packaging or custom configurations, contact sales department.

STANDARD PRODUCTS AVAILABLE FROM STOCK - ORDERING INFORMATION
USM P/NMIN QTYU/PORDER/RFQSTOCK QTYU/PORDER/RFQ
No part available from stock

HSKBEOI05xxxyyy Beryllium Oxide Isolated Heat Sink INSTANT QUOTE
US Microwaves P/N Quantity E-mail    
 

ORDERING: Beryllium Oxide Isolated Heat Sink may be ordered on line HERE. A copy of the order along with an order confirmation receipt is issued instantly for all orders placed on line. On line Orders have to be verified, accepted and acknowledged by US Microwaves sales department in writing before, becoming non cancelable binding contracts.
DELIVERY: Typical delivery for 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks BeO products packaged in waffle packs is 2-4 weeks ARO. For custom designs, delivery is 3-5 weeks ARO. Certain items may be available from stock with delivery up to 1 week.
SHIPPING/PACKAGING: All 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks devices for chip and wire applications are 100% tested, visual inspected and shipped in waffle packs (WP). For larger orders,>10k pc, devices can be shipped on film frame. For smaller quantities, it may vary. For high volume automated assembly, heat sink devices may be supplied as 4" wafers 100% tested, inked and diced on expanded film frame (FF).
SAMPLES: Samples of 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks are available only for customers that have issued firm orders pending qualification of product in a particular application.

GUARANTEED SUPPLY! US Microwaves guarantees continuous supply and availability of all 5 mils thick gold coated thin film Beryllium Oxide Isolated heat sinks standard products provided minimum order quantities are met.

U.S. Microwaves has made every effort to have this information as accurate as possible. However, no responsibility is assumed by U.S. Microwaves for its use, nor for any infringements of rights of third parties which may result from its use. U.S. Microwaves reserves the right to revise the content or modify its product line without prior notice. U.S. Microwaves products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of U.S. Microwaves.


Last updated: September 24, 2010
US MICROWAVES | Tel:408-758-8690 Fax: 408-986-8027 | USMICROWAVES

©1990-2018 US MICROWAVES All rights reserved. No material from this site may be used or reproduced without permission.